Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: I need some CNC work done
-
29th November 2011, 10:25 AM #1New Member
- Join Date
- Nov 2011
- Location
- sydney
- Posts
- 6
I need some CNC work done
Hi There,
I run a small company with my partner and we need some woodwork and CNC work done. We are trying to construct a 3 bladed wooden propeller of about 1.45m diameter. This project will need a bit of preliminary test work prior to a small production run of about 10 units. If all goes well we hope to increase production, but we'll see if it all makes it that far. If this is work that you are interested in please don't hesitate to contact me at [email protected]
Thanks,
Lachlan
PS. if you are reading this, please post a reply if to only confirm that people are finding this thread. Thanks.Last edited by LachlanT; 29th November 2011 at 02:57 PM. Reason: I have no idea if anyone is reading my post.
-
29th November 2011 10:25 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th November 2011, 06:59 PM #2
1.45meter is quite large but will fit into a 1200mm wide machine , there are a few around but most of us have small CNC machines , mine is 450mmx 650mm
-
29th November 2011, 11:42 PM #3
Might fit on my machine.
Brad.
-
30th November 2011, 07:21 AM #4SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- NOWRA
- Posts
- 648
Lachlan,
Wish my machine was running again as it would definately be able to fit but thems the break. However, since you are in Sydney i would get in contact with Mark, MHastings2004 on these forums. His machine is plenty big enough and i am sure he would love to work on something like this. I can forward an email address privately or you can contact him directly through the forums. He should be on here occasionally and may even find these posts.
Anyway, i would think he is the best bet and is really only around the corner.
Daniel
-
30th November 2011, 10:14 AM #5Senior Member
- Join Date
- May 2009
- Location
- Gosford,NSW
- Posts
- 135
Hi Lachlan
Sounds like a fun project and definitely would fit on my machine (2.5 x 1.3 x 0.5 m envelope)
PM sent
Cheers
Mark
PS thanks Daniel.. your making me blush
-
30th November 2011, 04:12 PM #6New Member
- Join Date
- Nov 2011
- Location
- sydney
- Posts
- 6
Hi Daniel,
Thanks for the information about Mark, we've just talked about the project.
Regards, Lachlan
-
30th November 2011, 04:25 PM #7SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- NOWRA
- Posts
- 648
Great to hear Lachlan. I take it that these are due to be fans for your site? If so i hope to see them on your site one day in the near future.
Daniel
Similar Threads
-
Looking for Work
By Rodgera in forum WOODIES JOKESReplies: 3Last Post: 29th August 2011, 01:45 PM -
will this work?
By hammerfists in forum WOODWORK - GENERALReplies: 5Last Post: 5th August 2011, 02:16 PM -
Some of my work
By rich88 in forum BOX MAKINGReplies: 15Last Post: 27th December 2010, 09:17 AM -
Torque work centre for work space
By carrom in forum WOODWORK - GENERALReplies: 0Last Post: 30th December 2009, 05:29 PM -
My work
By Gazzapro in forum WOODWORK PICSReplies: 10Last Post: 16th April 2008, 02:57 PM