Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 84
Thread: CNC Router Build Steel & Ally
-
7th December 2012, 07:29 AM #16SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- NOWRA
- Posts
- 648
Yeah the lathe will be a challenge but worth it since i dont already have a lathe. I'd have to design it and lock it in before i start machining though. Accuracy wont be too bad, a good dial and straight edge would be handy and maybe a bed scraper. Dont think you'd need that thickness plate (unless its easily accessable at the right price) so I'll be using ~20mm steel plate for rail bed and spindle housing walls then torsion framing the base and epoxy granite filling it. Biggest thing though would be getting it stress releaved as it would be critical for a good accrate machine, then i'd just see a few of the guys i know locally with large cnc mills and get the mounting faces skimmed flat.
Well... it all sounds good in theory, well see what SWMBO says about spending more money first...lol.
Anyway, that machine looks great, keep it going.
Daniel
-
7th December 2012 07:29 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th December 2012, 09:27 AM #17
Hi Chris
Your machine looks very pretty. Have you been tarting it up with silver paint?Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
7th December 2012, 10:14 AM #18SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 988
-
14th December 2012, 08:29 PM #19SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 988
Got a couple of plates done for the Z axis, hoping to see some movement soon, and my spindle arrived (Teknomotor 1.6KW spindle from damencnc.com)
Does anyone know if the key slot on the spindle is a standard type of key? (8mm wide, 90mm long) as I'm planning on making use of it, if so any suggestions on where to look at buying one?
-
14th December 2012, 09:11 PM #20SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- NOWRA
- Posts
- 648
Awesome stuff Chris,
Looking forward to seeing the first moves soon.Last edited by twistedfuse; 14th December 2012 at 09:12 PM. Reason: ***Learnt to read***
-
14th December 2012, 11:05 PM #21
Not quite sure what you ar elooking for here Chris. Is this it?
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
14th December 2012, 11:22 PM #22Member
- Join Date
- Nov 2008
- Location
- Byron Bay
- Posts
- 96
Hi Chris,
I have the same spindle and bought some of this McJING Tools Online, worked well and does the job.
Cheers
Glenn
-
15th December 2012, 12:53 AM #23SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 988
-
15th December 2012, 08:53 AM #24Member
- Join Date
- Jul 2009
- Location
- Tasmania
- Posts
- 50
Hi Chris,
Your build is coming along well.
I also have a Teknomotor spindle...very pleased with it.
Cheers,
Kym
-
12th January 2013, 06:24 PM #25SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 988
Some progress pictures, not much done due to the holidays. (Y axis complete, Z axis just needing a ballscrew mount made up)
-
12th January 2013, 07:31 PM #26
The drive to Z is obviously not direct, so what will you be using?
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
12th January 2013, 07:53 PM #27Member
- Join Date
- Jul 2009
- Location
- Tasmania
- Posts
- 50
Hi Chris,
Looks like a top build in progress!!
I am interested is seeing your Z axis plate and Ball screw mount.
On my set up I had to add a spacer setup (I chose to add spacers to the linear rails) to gain clearance for the Ball screw.
Cheers,
Kym
-
12th January 2013, 08:41 PM #28SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 988
I was planning to use a bit of 10mm plate, "image attached" it would be mounted above the ballscrew meaning that the Z axis will be held up by the ballnut instead of bolts holding it up, only downside I guess is the potential to collect chips ect. but since I'll be machining mostly aluminium and plastics I don't think it'll be a problem.
The mounting plate itself will be threaded and the small 10mm plate will have oversized holes for adjustments.
Alternatively use the grinder and remove one side of the mounting holes and bolt it directly to the plate.
-
26th January 2013, 09:04 PM #29SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- Australia
- Posts
- 988
Some work done on the frame, had to do a bit of modifying to fit the enclosure but its looking good now, it'll get sandblasted and powdercoated when the time comes.
-
27th January 2013, 08:25 AM #30SENIOR MEMBER
- Join Date
- Feb 2008
- Location
- NOWRA
- Posts
- 648
Looks great!!!
Similar Threads
-
Steel cut off table build
By dazzler in forum METALWORK FORUMReplies: 4Last Post: 6th January 2011, 01:00 AM -
Help welding Ally
By Smicko in forum WELDINGReplies: 16Last Post: 10th May 2008, 10:26 AM -
When Ally aint Ally!
By BobL in forum METALWORK FORUMReplies: 22Last Post: 21st January 2008, 11:36 PM