Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: DragKnife
-
8th May 2013, 01:09 PM #1
DragKnife
I was doodling last night and drew up a drag knife
DragKnif.JPG
The blade is 0.5mm behind the center line , so it should turn the spindle axle when the machine go's around a corner
it has 3 blade angle settings , 30deg , 45deg , 60deg with a 6.5mm diameter shaft and uses standard " utility knife " blades
I HAVE NOT TESTED THIS
DragKnifeDXF.zip
DragKnifeSTEP.zip
DragKnifeSTL.zip
should be able to make cardboard boxes for your sell able items out of old cardboard boxes with thishow come a 10mm peg dont fit in a 10mm hole
-
8th May 2013 01:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
8th May 2013, 03:37 PM #2
I'm probably not looking at it properly, but the blade looks as if it is in the holder the wrong way round. IE. with the back of the blade facing the cutting direction.
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
8th May 2013, 03:45 PM #3
there are 3 blades drawn , one for each angle , there Stanley knife blades , the 3 blades make it look weird but i needed them to get the screw holes right and left them in the drawing
how come a 10mm peg dont fit in a 10mm hole