Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: More power required.
-
28th February 2018, 02:33 PM #1SENIOR MEMBER
- Join Date
- Feb 2015
- Location
- Oz
- Posts
- 615
More power required.
Here's a video of the stepper motor hooked up to my lathe, unfortunately, the motor simply doesn't have enough power.
I wanted to hook a stepper up to the carriage, cross feed, compound and tailstock with an array of switches to allow me easy push button control to save my hands.
Not to be, - yet. The premise works well because with a stepper I have precise control on stop and start plus I can still use the handles by hand if I were to use belt drive. Got to get a motor powerful enough first.
https://www.youtube.com/watch?v=quZ4...ature=youtu.be
-
28th February 2018 02:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th February 2018, 08:07 PM #2Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,471
If you don’t mind a slower rotation, how about a geared stepper?
https://www.ebay.com.au/itm/27-1-Pla....c100677.m4598
-
28th February 2018, 08:12 PM #3SENIOR MEMBER
- Join Date
- Feb 2015
- Location
- Oz
- Posts
- 615
Slower is ideal actually trouble is most are worm drives which means manual rotation is not possible
-
28th February 2018, 08:16 PM #4Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,471
That one is a planetary gear set. Also, you can drive the motor at a higher voltage ( up to 45v I believe) and the TB6600 will handle the amps you set. Higher voltage will give greater torque according to articles on the web.
-
1st March 2018, 10:54 AM #5SENIOR MEMBER
- Join Date
- Feb 2015
- Location
- Oz
- Posts
- 615
power supply is the problem, that's why I opted for 12 volt, easy to come by. I do have 18 and 21 volt supplies but I think they are a little under power for this application, I'll give them a go though.
-
1st March 2018, 12:29 PM #6SENIOR MEMBER
- Join Date
- Feb 2015
- Location
- Oz
- Posts
- 615
Ran the stepper on 21 volt and 40 volts. lots of noise no go. I found 12 volt actually worked better. I think it's time to give this away, spent far too much time, effort and money - not to be. Now I have motors, controllers, generators all over the place and nothing to use them on.
-
1st March 2018, 09:10 PM #7Simple solutions are only simple in hindsight.
See my rig here- https://www.woodworkforums.com/f170/my-junkbot-123715/
Similar Threads
-
Power required for ripping old hardwood sleepers
By Gestalt in forum WOODWORK - GENERALReplies: 13Last Post: 29th September 2017, 12:53 PM -
Engineering help please - flex in stainless tube and motor power required for spit
By 19brendan81 in forum METALWORK FORUMReplies: 19Last Post: 19th September 2013, 10:04 AM -
Nakamichi Soundspace 5 power supply pin-out details required!
By Master Splinter in forum HI FI EQUIPMENTReplies: 4Last Post: 13th April 2008, 04:03 PM -
People Power Required
By rod1949 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 60Last Post: 17th April 2005, 01:14 PM -
How much horse power is required
By gmcginty in forum BANDSAWSReplies: 2Last Post: 9th December 2004, 12:59 AM