Thread: Wiring between stepper motors and the drivers

Originally Posted by Lappa

These are the switch settings on my 542T driver, It has 8 switches.

Attachment 443870

My Tb6600 knock off only has 6 switches.
First 3 are for current limiting setting ; Last 3 are for divisions of steps eg. 1; 1/2; 1/4; 1/8; 1/16 etc.

They vary so you would need to be specific for your driver

Yours is a bit different to mine. I'm not going to muck around with the settings as they work fine. Don't fix what ain't broke, as they say