Page 1 of 5 12345 LastLast
Results 1 to 15 of 61
  1. #1
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default Bridge City Tools Chopstick Master V2

    Now first of all, before the howls of derision start, YES I know that this is an indulgence and that I can buy chopsticks for a few cents each but....... THIS IS FUN!
    I bought mine a week ago from Major Woodworking Equipment. It is BEAUTIFULLY packaged and presented and well thought out.

    B7605309-BD75-45A5-83F4-148B126C2450.jpeg

    In addition to the jig and block plane you get a honing jig, pencil(!), A square of sandpaper(!), chopstick oil, 6 pairs of blanks and 10 chopstick bags. I have decided not to use the supplied consumables as this could enhance any future resale value.
    Basically the main jig holds the blank at the required angle/s and provides a guide for the block plane to taper the 4 sides of the blank about its centre line and then further taper the lower half by shaping the ‘pointy end’ to an octagon.
    Mine is a V2 and the difference only appears to be the method of making the pyramid on the ‘blunt end’. The V1 used a depth stop and tiny saw blade wheras the V2 uses a clamp set into the end frame of the jig and cuts the pyramid using the block plane...
    11A893A5-B4E0-48FE-B9C2-72F243346FA7.jpg

    .... and does a lovely job of it!
    My GRAND PLAN is to use off cuts (from most probably my box work), trim them to 7 x 7 x 270, throw them into a box and convert them to chopsticks in batches?
    So far I have made some from wenge and will soon convert some Huon pine off cuts as well.
    My daughter will probably package them in little ‘velvet’ bags, include a descriptive note about the exotic timber and add them to her market range 🙂
    A price tag of $380 confirms its indulgent and quirky status ......but it sure is FUN!

    fletty
    a rock is an obsolete tool ......... until you don’t have a hammer!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    6,127

    Default

    Quote Originally Posted by fletty View Post
    A price tag of $380 confirms its indulgent and quirky status ......
    Just having the Bridge City name confirms that

  4. #3
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by elanjacobs View Post
    Just having the Bridge City name confirms that
    a rock is an obsolete tool ......... until you don’t have a hammer!

  5. #4
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    PS, there is (at least) one more practical use for the chopstick master. By stopping before planing the ‘octagon at the pointy end’ stage, it makes brilliant square tapered bore pins for Arts and Crafts style furniture. I’m going to get a drift punch made that should stop unwanted rotation and won’t damage the pyramid as it is driven in.

    fletty
    a rock is an obsolete tool ......... until you don’t have a hammer!

  6. #5
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    As you say Allan, an indulgence.

    But next time you have a GTG, you could serve noodles and require each forumite to make their own chop sticks before they eat.
    regards from Alberta, Canada

    ian

  7. #6
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,651

    Default

    Quote Originally Posted by ian View Post
    ...require each forumite to make their own chop sticks before they eat.
    Why stop there? Let 'em make the noodles too!
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  8. #7
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by FenceFurniture View Post
    Why stop there? Let 'em make the noodles too!
    you put saw dust and shavings in your noodles ???




    seriously, having watch a Japanese chef make noodles, it's a pretty skilled task
    regards from Alberta, Canada

    ian

  9. #8
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by FenceFurniture View Post
    Why stop there? Let 'em make the noodles too!
    ....and I could call it the "use ya' own noodle GTG" ?
    a rock is an obsolete tool ......... until you don’t have a hammer!

  10. #9
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by fletty View Post
    ....and I could call it the "use ya' own noodle GTG" ?
    regards from Alberta, Canada

    ian

  11. #10
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    3,198

    Default

    OK, since one person has purchased this kit (and fletty at that), that's the entire Australian market for handmade chopsticks covered..... No need for anyone else to get one.

    Honestly, when I got the Bridge City email announcing this "exciting new product" some time ago, I emailed them back to ask if this was some kind of late April Fool's prank (like the products Veritas announce around then). They were most upset

    I confess to owning a Bridge City KM-1 Kerfmaker, which does get some use in the shed. The rest of the time it is on display in a glass case in the pool room...

    Interesting that a few outlets here are reselling Bridge City stuff now. When I dealt with them years ago I had to use their "pre-order, pay half up front, we'll make it when we feel like it, pay the rest when it's ready to ship" business model. All the Bridge City stuff Major Woodworking had on display at the Canberra WWW show already had a liberal coating of drool on it by the time I got there.

  12. #11
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    7,696

    Default

    Fletty now needs to buy the saw so myself and FF can work out if it is worth the dollars or not.

    CHRIS

  13. #12
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,373

    Default

    Don't knock the saw, the way electricity prices are going it may well be the answer
    The person who never made a mistake never made anything

    Cheers
    Ray

  14. #13
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,651

    Default

    Quote Originally Posted by Chris Parks View Post
    Fletty now needs to buy the saw so myself and FF can work out if it is worth the dollars or not.
    Yeah that is a seriously nice looking bit of kit........still nagging at me......
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  15. #14
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    74
    Posts
    3,576

    Default

    Quote Originally Posted by Chris Parks View Post
    Fletty now needs to buy the saw so myself and FF can work out if it is worth the dollars or not.
    Who? Me? The one who has spent a large part of the last 12 months improving and sound proofing his dust collection system?

    Mind you, a few days after routering off half a finger, I did download all of the brochures. Like all Bridge City fare, the Chopstick Master and Jointmaker are aimed at niche markets and those 2 are aimed at those who have removed fingers but would rather have kept them to eat Chinese food with tailor made chop sticks?

    fletty
    a rock is an obsolete tool ......... until you don’t have a hammer!

  16. #15
    Join Date
    Dec 2011
    Location
    SC, USA
    Posts
    599

    Default

    No need to justify it... It looks like a seriously cool and fun little tool. No doubt the plane is useful on it's own.

    Let's face it... All of us here have spent money on worse and more useless junk - though perhaps less at a time... If I added up the money and time I spent on old tools that turned out to be duds... And don't even talk about the money I have spent on cheap chisels - and trying to reharden them..... And then there's the boat... Well - bridge city would have several more sales...

Page 1 of 5 12345 LastLast

Similar Threads

  1. Contributor ProTooling | Bridge City & Japanese Hand Tools...
    By ProTooling in forum MEMBERS' BUSINESSES & SERVICES
    Replies: 10
    Last Post: 13th March 2018, 03:25 PM
  2. QUEENSLAND Bridge City Tools DJ2 Drilling jig w/ metric bushings, universal jaws and flip stop
    By kfinch in forum WOODWORK - Tools & Machinery
    Replies: 2
    Last Post: 4th March 2018, 02:18 PM
  3. Bridge City Plane
    By clear out in forum HAND TOOLS - UNPOWERED
    Replies: 21
    Last Post: 19th October 2017, 08:19 PM
  4. Bridge City Tools
    By FRB Design in forum WOODWORK - GENERAL
    Replies: 76
    Last Post: 26th November 2011, 10:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •