Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2015
    Location
    australia
    Posts
    3

    Default Bench Seat Restoration

    Hi guys,

    I came accross this bench seat recently and thought it might be a good restoration project. Im just looking for some advice on whether its repairable and if so, how I would go about it? As you can see in the pics, the leg has come off the seat, could it just be bolted and glued back in? (Pics to come)

    Thanks,
    siphco

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2015
    Location
    australia
    Posts
    3

    Default

    As mentioned

    1.jpg 2.jpg
    3.jpg image.jpg

  4. #3
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    It looks like the part of the rail(mortice) is still in the leg. Which means that you would need to take it apart to clean up the broken pieces and then make a loose tenon to attach the rail and leg.

    The other side looks like the leg has a crack in it which seems to be hollow? I am not sure what would be the best option. I am tending to think that you would have to cut out and then fill in with solid wood, using epoxy as the glue, then mortice out for a loose tenon.

    I gather that the back is pretty solid?

    I am just thinking out loud now as without taking everything apart can this be approached this from the underside to hollow out the mortise and then add another support at the back part of the front leg. As you will loose some support if you come at this from the underside.

  5. #4
    Join Date
    Jul 2015
    Location
    australia
    Posts
    3

    Default

    thanks for your reply,

    Yes the back is fairly solid, its just those two parts where the rail attaches to the leg that are the problem.

    I take it that means you dont think a bolt or some kind of brace could be used instead of taking it apart? im new to this so probably dont have the correct tools available!

  6. #5
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    1,809

    Default

    Quote Originally Posted by siphco View Post
    thanks for your reply,

    Yes the back is fairly solid, its just those two parts where the rail attaches to the leg that are the problem.

    I take it that means you dont think a bolt or some kind of brace could be used instead of taking it apart? im new to this so probably dont have the correct tools available!
    I am sorry to be the bearer of bad news but:
    The bench looks like one of the Asian products made from rainforest timbers and sold through many outlets for low or at least low-ish prices. Some of those are surprisingly well made but others are knocked together roughly and the gaps filled with bog, which has little or no structural strength, especially once the weather gets in and rot begins. Unfortunately, this one looks like one of those.

    Repairing something with many poor or faulty joints will require considerable expertise and good workmanship as well as quite a few tools. As the above response by Christos has indicated, the only real way to fix a bad/broken joint is to pull it apart, clean away all bog, rot and old glue and then make new solid joints with good timber and construction techniques, like the slip tenons mentioned. Trying to attach braces/ screws and or bolts will not create a solid and safe piece of furniture and will probably weaken the bench further as the timber often does not have great structural strength.

    If you have or want to acquire the skills and the tools then this would be a great project to practice your skills. However, at the end all you will have is still a cheapo Asian bench, so you would only do it if you just loved woodwork and wanted something to practice on.

    Solid Australian timber second hand furniture needing some work can often be purchased very cheaply and IMHO will better repay your efforts. It is a bit like spending a fortune to repair an old run-of-the-mill (rotm) car instead of either repairing a classic or putting the money into a good quality car. It doesn't matter how much you spend on the rotm, you end up with a rotm in the end and it won't be worth more than when you started.

    As, I say, sorry to give such negative advice, and I wish you well in whatever you decide to do. On the positive, I do not know where you are in Australia, but if you are keen to learn there are many great classes around Australia where you can learn the techniques that you need. Some teachers may let you take the item in to learn how to fix it, others will just teach you how to make good joints and what tools to use. It is a wonderful hobby so please do not let my comments above put you off.

    David

Similar Threads

  1. Restoring a bench seat
    By ROWLAD in forum WOODWORK - GENERAL
    Replies: 4
    Last Post: 2nd January 2013, 06:54 PM
  2. Bench seat
    By Flash72 in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 0
    Last Post: 10th August 2012, 09:30 PM
  3. Advice on a bench seat.
    By cmooring in forum WOODWORK - GENERAL
    Replies: 9
    Last Post: 13th October 2010, 01:02 AM
  4. Van Bed and Bench Seat Fit-out
    By Eldanos of KDM in forum WOODWORK PICS
    Replies: 5
    Last Post: 26th July 2009, 08:58 AM
  5. Bench seat.
    By Zarguld in forum WOODWORK PICS
    Replies: 5
    Last Post: 15th February 2009, 03:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •