Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 31
  1. #16
    Join Date
    Feb 2008
    Location
    Canberra
    Posts
    788

    Default

    It's getting close to actually being a chair

    Finished Cedar plugs on the front legs.

    20.jpg

    All the components (minus the seat) have now had the polish smoothed out. I washed a bit of the old dirty polish over the new bits of Cedar to blend the colour.

    21.jpg

    I used a chisel, gouge, hand drill, and a brace countersink to make some pocket screw holes.
    A lot of rail back chairs just had the seat nailed onto the rails. I considered doing this, but I didn't have enough old period nails.
    The other rail back (pictured above) that I have, has original pocket screws.

    22.jpg

    Glue up time.
    The back is now on the back section. The front legs and rail are together.
    Tomorrow I'll glue up the side rails.

    23.jpg24.jpg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #17
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    53
    Posts
    8,879

    Default

    I find this thread inspirational. Nice work.
    Visit my website at www.myFineWoodWork.com

  4. #18
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    497

    Default

    Very impressive work Thumbthumper, and so readily shows how well cedar responds to some TLC.

    A quick question and hopefully not a dumb one, out of curiosity, where do you get your hide glue from and just how suitable is it to this sort of work (suspect I know the answer to this). The other and possibly equally dumb question is why to use a hide glue rather than a modern epoxy resin type glue (again I suspect I know the answer to this).

    Am sure looking to see the finished product, including how you join the base, given if I understood it you are going to have to join two sections cut down from an old table top.

  5. #19
    Join Date
    Feb 2008
    Location
    Canberra
    Posts
    788

    Default

    Quote Originally Posted by Horsecroft88 View Post
    Very impressive work Thumbthumper, and so readily shows how well cedar responds to some TLC.

    A quick question and hopefully not a dumb one, out of curiosity, where do you get your hide glue from and just how suitable is it to this sort of work (suspect I know the answer to this). The other and possibly equally dumb question is why to use a hide glue rather than a modern epoxy resin type glue (again I suspect I know the answer to this).

    Am sure looking to see the finished product, including how you join the base, given if I understood it you are going to have to join two sections cut down from an old table top.
    The last batch of hide glue I bought was from this forum's sponsor. I use the pearl type.

    HIDE GLUE - Joiners Pearl Glue

    Hide glue is fantastic stuff. It's got instant grab if you're sticking glue blocks. You can get old joints apart with heat/water. It can be mixed for some slip if you're veneering. It doesn't mess with finishes. I can be glued to itself. I could go on, but read up about it. Once you use it, you won't go back

    I've seen 160 year old furniture with good strong joints that I believe are original. I'm not sure if any of the modern glues would last this long (I suppose only time will tell).
    The next person to restore your furniture (in 200 years time) will thank you. The goes the same for the shellac finish.

    I'm also a bit of a traditionalist. I use traditional tools/techniques/finishes/hardware and glues. The bandsaw is the only power tool that I use regularly.
    I like the whole sympathetic approach.

    For the seat, I would prefer to use a single piece, but I don't have a wide enough board that is about 10mm. I do have wide boards 25mm thick, but my bandsaw isn't big enough to re-saw boards that wide. The piece of table top that I had, fitted though the bandsaw, and sawed into two boards about 10mm thick. There will only be one join, and seeing as how they'll be out of the same board, the colour match will be perfect.

    I'll start work on the seat, after I finish the glue-up.

  6. #20
    Join Date
    Feb 2008
    Location
    Canberra
    Posts
    788

    Default

    Quote Originally Posted by Wongo View Post
    I find this thread inspirational. Nice work.
    Thanks Wongo.

    I just hope it doesn't push the price of Cedar bits and pieces up

  7. #21
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    497

    Default

    Thanks for the advice re the glue Thumbthumper, that is really most helpful and timely. I too like traditional methods and finishes, hence sought out such advice 20 something years ago as to how I should finish the joinery in my home, shellac of course being the answer. And I am still using it, and won't use anything else, apart from tung oil on the floor and bench tops etc.

    I know it is slow, pedantic, but the finish, feel and look of it is what I love. I so dislike modern plastic finishes. Hence therefore to find out that there is an equivlent choice for glues, is the right choice for me. I will get onto this ASAP.

    I understand what you say being a traditionalist with your tools as well; though for house construction/restoration purposes I have to admit to owning both a drop saw and a circular saw, but I wouldn't use them for furniture. Similarly I have an orbital sander, electric drills etc, but again not to be used for furniture restoration projects, well maybe the drill for specific purposes only. I do use a heat gun to get paint off, but thereafter everything is done by hand.

    What you say about the seat base sounds fine to me. With one of my two wooden base cedar bar backs it has a one piece base, the other is a two piece joined approximately in the middle. I really like the look of these chairs and they seem to suit both my early houses, as do my other antiques. I am not really a modern furniture person.

  8. #22
    Join Date
    Feb 2008
    Location
    Canberra
    Posts
    788

    Default

    I got the chair frame glued up this morning.

    25.jpg

    The old table top has some nice Cedar in it. The face of the seat will be the old top.
    Ready made character .

    26.jpg27.jpg

    I worked out a way to avoid the old screw holes.
    I roughly cut out a square.

    28.jpg29.jpg

    Jointing the boards.

    30.jpg

    And the glue up.

    31.jpg

    Next job is to start shaping the seat.

  9. #23
    Join Date
    Jul 2010
    Location
    melbourne
    Posts
    381

    Default looking great

    The chair frame looks great tubthumper.
    Can't wait to see it finished

    Cheers

    Frank

  10. #24
    Join Date
    Feb 2008
    Location
    Canberra
    Posts
    788

    Default

    I've finished shaping the seat base.

    Here it is all dirty.

    32.jpg

    And after a good scrub with metho.
    There's not much original polish in this old table top.

    33.jpg

    Next, I'll be screwing down the base, giving the whole chair a polish.

    Stand by for the glamour shots soon

  11. #25
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    497

    Default

    Really looking forward to completion of this seat, as are you I would expect. A real credit to your restoration work to bring this back to life, and it will be a pleasure to both look at and sit on. I enjoy mine.

  12. #26
    Join Date
    Feb 2008
    Location
    Canberra
    Posts
    788

    Default

    Finished !

    I still need to give it a buff with some wax, but it's moving into the house tonight.
    I ragged on a finish based on about 1 cup shellac, 2 tbsp BLO and 1/2 tbsp pure gum turps. I added the turps because I wanted a lower sheen.

    We've come from this ....

    38.jpg

    To this ....

    34.jpg35.jpg36.jpg37.jpg

    Thanks to all who had a look.
    Time to find another project

  13. #27
    Join Date
    Mar 2009
    Location
    Hobart
    Posts
    497

    Default

    A magnificent result and definitely worth while spending the time and some materials on rescuing one more chair from our past. I can well imagine this is a worthy addition to your home. Enjoy the results.

    What next ??

    My table project similarly is closing in on completion. I ended up filling the crack with a dark cedar putty and re-shellacing the top numerous times. Have just cut it back and wax polished it. Will talk a little more about mine over on my thread.

    Look forward to what ever you tackle next. Always learning from others here.

  14. #28
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    This is very impressive work.

  15. #29
    Join Date
    Aug 2007
    Location
    St Georges Basin
    Posts
    1,016

    Default

    Lovely job Tt! Good to see someone who doesn't muck about too!

  16. #30
    Join Date
    Dec 2008
    Location
    Bradbury
    Posts
    1,429

    Default Re: Let's turn this into a chair

    Wow! That's fantastic. What an amazing job. Congrats

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Windsor chair - fan back side chair course
    By MGFWoodworking in forum ANNOUNCEMENTS
    Replies: 0
    Last Post: 28th August 2012, 04:20 PM
  2. My trying to turn.
    By cookie48 in forum WOODTURNING - GENERAL
    Replies: 4
    Last Post: 13th June 2011, 12:10 AM
  3. GOLF CHAIR (a chair with balls)
    By Michael Spain in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 10th June 2011, 09:13 PM
  4. AFTER THE 1st.YOU TURN.
    By issatree in forum WOODTURNING - GENERAL
    Replies: 0
    Last Post: 1st May 2009, 08:48 PM
  5. THE 1st.YOU TURN.
    By issatree in forum WOODTURNING - GENERAL
    Replies: 3
    Last Post: 24th April 2009, 10:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •