Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Restoring antique mirrors
-
14th May 2012, 01:50 PM #1
Restoring antique mirrors
Hi guys, I recently aquire an old silky oak sideboard with a bevel edged mirror mounted in the back board that the silver coating has started to detoriate, my qestion is can the silver coating be stripped off and redone and if so any ideas as to where or who does it?
-
14th May 2012 01:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th May 2012, 02:06 PM #2
If the mirror is a plain square or rectangle, it would be cheaper to just order a new, bevelled glass. However, if it's irregularly shaped, any good glass supplier could have it re-silvered.
I use Varga Brothers in Mitcham, but Bluff Mirror & Glass would be closer to you..
I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.
Regards, Woodwould.
-
29th July 2012, 05:37 PM #3Member
- Join Date
- Jul 2012
- Location
- Sydney
- Posts
- 75
How old, unique and collectable is the piece?
For the real hardcore antique people, deterioration on a mirror is just patina and replacing it with a new mirror or even re-silvering it will, more often than not, substantially alter the value of the piece (for the worse) if it's got some value to start with.
The French particularly are serious old mirror recyclers and you'll see ancient but seriously, seriously deteriorated mirrors regularly re-used in newer pieces.
Obviously if it's nothing special and you just want a pristine mirror then by all means replace it.
Be nice to see a photo.
Similar Threads
-
Two Small Mirrors
By Woodwould in forum WOODWORK - GENERALReplies: 12Last Post: 14th January 2011, 09:01 PM -
Cutting Mirrors
By Just George in forum WOODWORK - GENERALReplies: 11Last Post: 7th October 2007, 12:30 AM -
Restoring English Oak antique furniture
By dan_tom in forum FINISHINGReplies: 3Last Post: 16th May 2005, 11:07 PM -
Looking for 50mmX50mm mirrors.
By jamesfisher in forum WOODWORK - GENERALReplies: 2Last Post: 30th January 2004, 02:12 PM