Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default Silky oak wardrobe to become bookcase

    Hi All,
    I finally decided that I would invest in getting a mirror made for this double door wardrobe but rather convert it into an open bookcase. The outside was cleaned and new shellac added. Now I've removed the doors and the middle panel. The middle panel will be replaced with either glass or a gold tinted acrylic. The next structural step is installing shelves. What timber to use?

    The issue right now is how to protect the insides that have been cleaned. The bottom had to be sanded to get the ingrained dust our. I have Penetrol oil, Tung oil, and Wipe On poly. Any ideas?
    Cheers,
    NickIMG_0345.JPGIMG_0347.JPGIMG_0355.JPGIMG_0351.JPG

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    1,147

    Default

    That's a nice piece you have there. I would use a poly as i believe oil or similar will be a dust collector and again hard to keep clean.

  4. #3
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Interior with 3 layers of wipe on poly
    IMG_0359.JPG

  5. #4
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    1,809

    Default

    IMHO re-purposing is not restoration, but I am a purist.

    The obvious and best thing to use for shelves is the same timber - Northern Silky Oak. It sometimes comes up on these forums and, when recycled, is usually very affordable. Try putting a request out there in the Marketplace..

    You could use Hoop Pine (Sandgate Timber Mill) for a quality board or even Tas oak (I was offered quite a lot here in Brisbane when I put out a request on the forums and I haven't been able to grab it yet so you could be lucky if you are quick!

    Unfortunately, the manufactured boards such as MDF and chippy are not good for bookshelves as they sag badly and look lousy.

  6. #5
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    I'm still practising on items such as this before I touch the real restoration items I have such as a maple bedroom suite. I have 2 silky oak wardrobes already in the house and there is a third that needs the missing top replaced and then a dining room suite

    MDF and chip board is forbidden to come in the house by SWMBO. Even the modern pine furniture inherited is to be removed eventually. I have silky oak house doors and bed ends that were to be for wood supply but that has changed.

    I will go for the silky oak or Tasmanian oak (actually saw some today). I'll up date as I go. I just finished cleaning down the French polishing as SWMBO said it wasn't good enough. As she grew up with this furniture type she knows better what it should be like.

  7. #6
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    1,809

    Default

    Sounds good. I look forward to seeing progress. Good French polishing requires the use of very dilute shellac on a rubber. Concentrated shellac and brush application (even with a superb Badger or other very fine hair brush) always comes out rougher and is to some extent murky/hides the figure. It is a lot of work in some ways, but the clarity of finish and quality make the effort worthwhile. A relatively dry rubber, each coat dries almost as soon as you finish rubbing here in Brisbane. Every few coats (5-10) rub back with 800 to 1000 grit wet and dry, wipe off and go again. I prefer the original button shellac, which is high wax content, but that is a personal preference.

  8. #7
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Cleaned and first new layer of shellac

    IMG_0365.JPGIMG_0366.JPGIMG_0367.JPG

  9. #8
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Default

    I am somewhat envious!! I have a liking for both SO and that style of furniture.

    Waiting on the finished piece with interest!1

  10. #9
    Join Date
    Jan 2007
    Location
    Brisbane
    Posts
    696

    Default

    Back to work so it will go slow now. I have to prepare to return the top that was removed to ensure the shellac was cleaned and added to the top properly. After this there is a similar wardrobe where someone sadly took the carved front doors and cut them up to a frame around the front of the wardrobe. They also had some very bad attempt of staining. There won't be any guilt in taking it back to the grain and starting again. It is the sort of piece I prefer to find and bring back to life.

    Today ,barring heavy rain, we will bring home 2 large 3 tier wardrobes and 2 matching dressing tables that were built in post 74 Brisbane floods. The wardrobes are the heaviest I have ever experienced. Even the tops and bottom are silky oak. They will have photos posted soon. They will be a recovery of the'poly type as there are some knocks to some surfaces.

Similar Threads

  1. Restoring silky oak wardrobe
    By Vonnie in forum RESTORATION
    Replies: 8
    Last Post: 14th February 2015, 06:40 PM
  2. how to restore this silky oak wardrobe? SOS!
    By pup76 in forum RESTORATION
    Replies: 8
    Last Post: 17th May 2013, 01:17 AM
  3. Restoration old silky oak wardrobe
    By angelmark in forum RESTORATION
    Replies: 52
    Last Post: 7th October 2012, 06:56 PM
  4. Silky Oak Wardrobe Restoration Question
    By Earthling#44-9a in forum RESTORATION
    Replies: 8
    Last Post: 12th July 2010, 09:47 PM
  5. Silky bookcase
    By Scally in forum WOODWORK PICS
    Replies: 23
    Last Post: 28th December 2009, 02:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •