Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 12 of 12
  1. #1
    Join Date
    Nov 2008
    Location
    Sydney
    Age
    93
    Posts
    570

    Default Band saw or table saw for toy-making?

    I hope my question has not been put elsewhere but, if it has, I have not been looking in the correct places.

    To make wooden toys from hard and/or soft stock of 25mm to 50mm thickness of no greater than 320mm high and 250mm width, should I buy a band saw, table saw or both, together with a linisher, please?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2007
    Location
    sydney
    Age
    63
    Posts
    488

    Default

    i personally use every bit of equipment i can use,the more the better. It all comes down to what you are trying to build and what you need to use wether it be powered or by hand.I have small bandsaw,scroll saw,table saw,drop saw,jig saw, large circular saw and small cordless circular saw and use them all, so i say you need them all.

    Proud to be an AUSTRALIAN
    Scotty


  4. #3
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    83
    Posts
    10,027

    Default

    I think it all comes down to the type of thing you are going to make such as the shape of the item. If you are going to make something with a few curves then the bandsaw maybe your best bet but if you need to make something that has straight lines to it then the table saw would probably be the way to go. Both pieces of equipment would be ideal.
    Reality is no background music.
    Cheers John

  5. #4
    Charleville's Avatar
    Charleville is offline Nocturnal and primeval - I fish at night.
    Join Date
    Nov 2007
    Location
    Brisbane
    Age
    73
    Posts
    656

    Default

    All of the toys shown below were made in the past 12 months using

    (a) bandsaw
    (b) router mounted in a very rough-as-guts table consisting of a bit of pre-loved melamine board on saw horses
    (c) a cheap GMC belt sander


    My technique has been to cut out a MDF template for each component piece on the bandsaw and to smooth the cut on the belt sander clamped sideways on a board and then by using the router with a straight cutting template following bit, after rough cutting of the workpieces on the bandsaw, trim them all to be identical shapes.

    The router can then be used with a round-over bit to give rounded edges and then all finally sanded by hand.

    Routing small pieces on a routing table safely can be a challenge. For a discussion about same refer to https://www.woodworkforums.com/f20/ro...-safely-98565/



    Click for full size - Uploaded with plasq's Skitch

  6. #5
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    45
    Posts
    3,316

    Default

    I would start with a bandsaw first .... gives you the option of curves and straight and is fairly safe when cutting small parts. There are small toy parts that I cut that I wouldn't dream of using a table saw for.

    Sanding is always needed so don't skimp here ... many small parts can be easily shaped on the sander alone.

    As others have said however the more tools the better .... it give you more options and is often safer. However with everything you just have to take your time and build up you machinery.
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  7. #6
    Join Date
    Sep 2008
    Location
    bateau bay
    Posts
    275

    Default

    Sometimes you can get in trouble using the wrong tool to do a job. As posted here already, get 'em all, it'll make your time safer and more productive. The gear I've got isn't expensive and each tool does a particular job. Table saw for straight cutting, router for routing, linisher and drum sanders on drill press for sanding, planer on triton for straightening and removal of small amounts that the table saw cant do. Jigsaw and scrollsaw for twisty curvy cutting. Lathe for turning. Hammer for hitting my thumb. Beer fridge for ...well you know. Cheers, billy

  8. #7
    Join Date
    Nov 2008
    Location
    Sydney
    Age
    93
    Posts
    570

    Default

    Many thanks to all you coves for your advice, much appreciated.

    Charleville, thanks for great pics. I am drawn to your minimal! suggestion but Hare and Forbes are having their Annual Sale soon, and they owe me a little in credit, so I am tempted to spend.

    Shall see what November brings.

    Am very grateful to all.

  9. #8
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    BS first in my book. It's relatively easy to cut straight with a BS but much harder to cut curves with a TS.

  10. #9
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    I'm a fence-sitter... I'd say both.

    It depends on what type of toys you plan to make.

    Something like Charleville's - with a lot of curves - is obviously best done on a BS.

    However, if you're building up toys such as cars, trains, etc. from primarily square-cut wooden blocks, then a TS would be the go. They can be done on a BS and cleaned up on a linisher, of course, but a TS would be quicker and less effort.

    Yeah, I'd definitely go for both. (And a linisher and a lathe and... )
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  11. #10
    Join Date
    May 2005
    Location
    Newcastle
    Age
    72
    Posts
    3,363

    Default

    Pretty much as skew said
    The only thing if you absolutely can only have one , with fences and practise and some skill you can (abet more slowly) everything on a band saw that you can on a table saw but not vice a versa
    Ashore




    The trouble with life is there's no background music.

  12. #11
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    52
    Posts
    6,883

    Default

    When I was making toys (and I'll get back to it one day) at the start, all I had was a bandsaw and a jointer - with those two I could do everything I needed. Now that I have pretty much all I need (except for a drum sander) I'd be using the t/saw in future.
    I make things, I just take a long time.

    www.brandhouse.net.au

  13. #12
    Join Date
    Nov 2008
    Location
    Sydney
    Age
    93
    Posts
    570

    Default

    Thanks everybody.

Similar Threads

  1. Table in the making
    By heymattwhat in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 6
    Last Post: 13th August 2009, 10:08 PM
  2. Making a table saw
    By DarkWolfz in forum WOODWORK - GENERAL
    Replies: 17
    Last Post: 25th August 2008, 09:42 AM
  3. what do you reckon- Table saw or band saw
    By Gussy in forum WOODWORK - GENERAL
    Replies: 21
    Last Post: 24th May 2008, 06:28 PM
  4. GMC table saw - making it better
    By blue penguin in forum TABLE SAWS & COMBINATIONS
    Replies: 24
    Last Post: 15th March 2007, 08:40 PM
  5. Table saw -v- Band saw
    By forunna in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 22nd June 2004, 09:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •