Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: How to make a spring rocker???
-
10th January 2011, 06:49 PM #1Intermediate Member
- Join Date
- Mar 2009
- Location
- Perth
- Posts
- 30
How to make a spring rocker???
Any ideas about how to make a copy of a playground spring rocker?
All they seem to be is a giant spring with a plate at each end, one going into the ground and the other holding the rocker.
Making the rocker would be relatively easy, but where do i get a strong enough spring?
How would you do it?
-
10th January 2011 06:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th January 2011, 07:42 PM #2Intermediate Member
- Join Date
- Mar 2009
- Location
- Perth
- Posts
- 30
IT would look something like this when completed.
Children spring rockers
-
10th January 2011, 10:49 PM #3
Wreckers for second hand. Car parts stores for new, & Suspension suppliers/repairers for new or used.
A car suspension spring should do the trick. autObarn or Repco will sell you new, but usually only in pairs. Places like Pedders might have coils they normally throw away after an upgrade as opposed to a wreckers that you'd usually have to remove yourself.Too many projects, so little time, even less money!Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds! Doing work around the home? Wander over to our sister site, Renovate Forum, for all your renovation queries.
-
23rd March 2011, 10:01 PM #4rogerjenkins Guest
Spring rocker
Secondhand coil springs are usually the easy bit,- almost every service station, & automotive repairer has at least one lying around somewhere. If you are wanting real heavy-duty tough springs, farm Implement parts suppliers are another source. The hard part is welding the top, & bottom steel plates onto the spring so it sits level. I can't help you here as am a hopeless welder at any time,- luckily I have a neighbour who can weld almost anything,- and gets everything sitting straight, & square too !!!
I have made a few of these ,'Springy,' rockers over the years, and found most youngsters really adore them. Mine had either a horse head, or a, ' Blinky Bill,' type head on them, although with a bit of creative imagination one could put all sorts of shapes onto the actual rocker.
Hope this bit of info is of some help,
Roger
-
24th March 2011, 08:49 AM #5
G'Day "perthmum",
From the pictures I've seen the spring is secured to a plate top and bottom with 4 or 5 shaped strapes [like a saddle] and screwed firmly into the plate; you could even weld the strapes.
Cheers, Crowie
Attachment 165191
Similar Threads
-
how to make a wooden spring latch for toy box
By Earthwhile in forum BOX MAKINGReplies: 0Last Post: 6th November 2010, 08:06 PM -
This spring
By Maximuss in forum Michael Storer Wooden Boat PlansReplies: 6Last Post: 10th April 2010, 12:41 AM -
Want to make some furniture in Mordialloc and make some money.
By Lignum in forum ANNOUNCEMENTSReplies: 8Last Post: 23rd April 2007, 12:04 AM -
Spring Bud
By Sculptured Box in forum BANDSAWN BOXESReplies: 17Last Post: 3rd April 2007, 08:29 PM