Thread: G'day from Melbourne

Welcome to the Forum Ruth and hope you get all the
assistance you require. They are a very helpful bunch
and are keen to see your work in due course.

What part of "Melbourne" are you in? If in the Northern
suburbs we, the Northern Woodturners Club , are located
in Kingsbury near Reservoir.

Happy to provide details if you are interested.

Allan

Thanks Allan,

I'm from Seaford. I believe there is woodturners group at McClelland Gallery, I've been down a few times, but there was never anyone about.

Welcome Ruth. You are pretty much like most of us here in that you are self taught, and seek advice from others when required. It sounds like you are well on your way with this addiction.
Everyone is very passionate about their woodwork here, but there are also many other hobbies and interests covered on the forum as well.
A club that is not too far from you is the Peninsula Woodturners Guild at Langwarrin which may be the one you are referring to. Lots of contact information on their website.
Make yourself at home here, and be sure to show us your works as they come along. We all love to see what others are doing whether it be for admiration or inspiration.

Originally Posted by RuthF

I began to make some simple jewellery boxes. I have no woodwork training, nobody to refer to, so it’s been very trial and error. I got a lathe for my birthday last year, so that was Christmas presents sorted out (pens for all!)

Welcome Ruth.


Seeing you now have a lathe, don't make pens but make small jewellery boxes on the lathe instead.

Whilst joining a club is great, a few lessons first with a professional turner is worth it's weight in gold and as you're close to I would thoroughly recommend him. You can sent to him a pm here.


Peter.

Hi Ruth,

And very warm Welcome to the forums. You will find many people just like yourself on here self taught and learning as they go, thats all part of the fun. Lots of knowledge and good people in here that are happy to share, help and advise and be sure to sing out in the forums if you ever get stuck with something.
And yes we all look forward to seeing photos of your work so do not be shy

Once again welcome
Cheers
Tony.

Originally Posted by Sturdee

Welcome Ruth.


Seeing you now have a lathe, don't make pens but make small jewellery boxes on the lathe instead.

Whilst joining a club is great, a few lessons first with a professional turner is worth it's weight in gold and as you're close to I would thoroughly recommend him. You can sent to him a pm here.


Peter.

Yes Peter, I've tried a few of them, but am limited by access to turning blanks of a decent size... Pens suit because the blanks are cheap and easy to obtain.

Welcome to the forum Ruth.

G'Day & Welcome to a top forum "Ruth".
There are a heap of members in Melbourne and across Victoria.....as you are already finding out....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork/turning.
Cheers crowie


PS - Was the chef reference and cook you under the table an invite or a challenge.. lol ..
as long as these is no wood shaving on the plate, after you've turned them of course on the new lathe ....

Originally Posted by crowie

PS - Was the chef reference and cook you under the table an invite or a challenge.. lol ..
as long as these is no wood shaving on the plate, after you've turned them of course on the new lathe ....

either, neither. Fact is, I'm not entirely sure what a jointer is. But I can do some things, so I've got that going for me )

Welcome aboard Ruth

Hi Ruth,

Another chef here

I'd be interested in seeing your coffee table! Amongst my other projects a coffee table is priority number one. I plan on making it out of pallet scrap, however I don't often see quality free pallets, most are the chep pallets that people don't throw away. I have a design for the table top but not for the frame. Iv'e got a few ideas off the net but I would be interested in seeing how yours was made and put together.

So looking forward to some pics!

I'm a newbie here too, welcome!

Drew

Hi Drew,

Since you asked so nicely, here is my first table.... the first thing I made, really....... It's not what you're looking for, as it's not got an actual top or base, but I thought It would look cool, so figured out how to make it, and it worked!

I made it so It would fit the height of my couches arm. It's made of Merbau and Pine and finished with Tung oil.

Originally Posted by RuthF

Hi Drew,

Since you asked so nicely, here is my first table.... the first thing I made, really....... It's not what you're looking for, as it's not got an actual top or base, but I thought It would look cool, so figured out how to make it, and it worked!

I made it so It would fit the height of my couches arm. It's made of Merbau and Pine and finished with Tung oil.

Very nice Ruth....
May I encourage you to show it off in the "General Woodwork Section" of the forum so others can see & appreciate your beaut table.
Cheers, crowie

https://www.woodworkforums.com/f11

Welcome to the Forum