Results 1 to 15 of 15
  1. #1
    Join Date
    Mar 2013
    Location
    scotland island
    Posts
    6

    Question newbie attempting to construct sliding doors sydney northern beaches

    Hi all
    Thought id tap into the wealth of knowledge out there on wwf.
    I do a bit of construction mostly small renovations part time but am attempting to build my own house.
    I may have bitten off more than i can chew but recently purchased a Festool Domino xl with the aim of building 2 sets of sliding doors spanning 4.5m @ 2.4m high glass infilled.
    Plan on having 3 doors stack 1 on a heavy roller track bottom weighted.
    Being in a bush fire zone it has to be constructed from Hardwood.
    What i was wondering is firstly- what species and where would i source stable and straight H/W from suitable for door construction.
    secondly- recommendations for glues to use when clamping the styles together.
    Cheers Jim

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2010
    Location
    Horsham Victoria
    Posts
    5,713

    Default

    Rwbuild would be a good one to help with sourcing materials and building the doors.

    Off the top of my head I'd say tite bond 3 but happy to be corrected.


    Welcome aboard. Start a build thread and load heaps of pics


    Dave TTC
    Turning Wood Into Art

  4. #3
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,373

    Default

    http://harpertimber.com.au/resources...rone-areas.php

    or Merbau which will probably be cheaper.

    Tite bond is good or epoxy, Suggest loose tenons for joining or better still, twin mortice & tenon for joints if the top and bottom rails are wide enough

    Thanks Dave, but Im sure there will be others just as qualified to comment
    The person who never made a mistake never made anything

    Cheers
    Ray

  5. #4
    Join Date
    Jun 2015
    Location
    Newport, Sydney
    Posts
    655

    Default

    Hi Jim.
    Welcome to the forum.

    Another timber to consider would be Blackbutt.

    You could happily use your Domino Machine but I would strongly suggest that you use epoxy to glue. I use Techniglue a lot and it never lets me down. Epoxy is extremely waterproof, strong and will gap fill around your dominos to create a long lasting joint. I agree with RWBuild that a full haunched and wedged mortice and tenon is better, but more difficult if you've never done it before. Hope this helps.

  6. #5
    Join Date
    Mar 2013
    Location
    scotland island
    Posts
    6

    Post

    Thanks for your advice guys.
    I have been recommended merbau by others which i understand to be not as oily as other hardwoods like spotted gum and tend to glue better.
    Advice sorted on how to either limit seepage of tannins or to accelerate seepage as greyed timber looks fine.
    I have also been recommended Purbond but have had no experience with yet.
    I would love to have the Knowledge patience and time to attempt wedged mortice and tenons but it might be a little beyond me and have purchased the domino (framing gun for novice joiners)
    which I intend to apply a few to each joint. The doors being bottom load bearing on stainless rollers should minimise the stress on these joints as they wont be swung off a jamb.
    cheers jim

  7. #6
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    68
    Posts
    2,335

    Default

    Welcome to the forum Jim.

  8. #7
    Join Date
    Jun 2015
    Location
    Newport, Sydney
    Posts
    655

    Default

    Good on you Jim. Keep us informed of your progress and post a few pics.

  9. #8
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by jimles View Post
    Hi all
    Thought id tap into the wealth of knowledge out there on wwf.
    I do a bit of construction mostly small renovations part time but am attempting to build my own house.
    I may have bitten off more than i can chew but recently purchased a Festool Domino xl with the aim of building 2 sets of sliding doors spanning 4.5m @ 2.4m high glass infilled.
    Plan on having 3 doors stack 1 on a heavy roller track bottom weighted.
    Being in a bush fire zone it has to be constructed from Hardwood.
    What i was wondering is firstly- what species and where would i source stable and straight H/W from suitable for door construction.
    secondly- recommendations for glues to use when clamping the styles together.
    Cheers Jim
    Hi Jim and welcome

    some questions if I may.
    the doors will be around 1500 wide by 2400 high and full glass except for the frames ?
    the glass will be double or triple glazing and/or fire rated ?
    the doors frames will be about 100mm wide ?
    they will run on a steel track and be guided at the top with rollers or glides ?
    the finished doors need to be BCA compliant ?
    regards from Alberta, Canada

    ian

  10. #9
    Join Date
    Mar 2013
    Location
    scotland island
    Posts
    6

    Default

    No problems Ian
    Correct, I was hoping to build the to around those dimensions.
    probably using a wider bottom rail and top rail around 200mm.
    Was hoping to use toughened glass about 6mm single glazed .
    fully loaded on bottom rail and guided from above.
    I managed to get The Bush fire attack level (BAL) to 12.5 for above the deck level
    so I think there is no real requirements other than hardwood.
    They will need to comply to something as a certifier will have to pass the build.
    Haven't looked too much into compliance but maybe I might need to. Any advice?

  11. #10
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    I managed to get The Bush fire attack level (BAL) to 12.5 for above the deck level.
    so I think there is no real requirements other than hardwood.
    They will need to comply to something as a certifier will have to pass the build.
    Haven't looked too much into compliance but maybe I might need to.

    I suggest you look into what the compliance requirements are before you progress too much further.
    It would be heart breaking to install a set of beautiful self made doors and then have the certifier knock them back for want of a proper compliance certificate.


    Dr Google return these

    https://www.awa.org.au/documents/item/174

    http://www.rfs.nsw.gov.au/plan-and-p...ion-and-design

    http://www.rfs.nsw.gov.au/__data/ass...-Chapter-4.pdf
    regards from Alberta, Canada

    ian

  12. #11
    Join Date
    Mar 2013
    Location
    scotland island
    Posts
    6

    Default

    Cheers ian will study up

  13. #12
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    Welcome to the forum.

  14. #13
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    3,495

    Default

    Welcome to the forum

  15. #14
    Join Date
    Jul 2010
    Location
    Shailer Park Brisbane Southside
    Age
    62
    Posts
    1,320

  16. #15
    crowie's Avatar
    crowie is online now Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    G'Day & Welcome to a top forum "Jim".
    There are a stack of members in Sydney and surrounds plus the rest of the country.....
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Looks like they're already on the job, well done all!!!
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork......
    Cheers crowie

    PS - Keep an eye out for a get together at Katoomba for the Sydney area forum members....great way to met & make friends..

Similar Threads

  1. Metal Work on Sydney Northern Beaches
    By Arfur in forum MEN'S SHEDS / MEN IN SHEDS
    Replies: 0
    Last Post: 31st March 2015, 04:05 PM
  2. hello from sydney's northern beaches
    By Marcos Lopez in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 7
    Last Post: 23rd August 2010, 08:34 PM
  3. Triton Club Sydney Northern Beaches...
    By HappyHammer in forum TRITON / GMC
    Replies: 2
    Last Post: 30th September 2004, 04:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •