Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: How to mark centre of 12mm hole
-
7th December 2022, 06:36 PM #1Intermediate Member
- Join Date
- Nov 2009
- Location
- Rockhampton
- Posts
- 43
How to mark centre of 12mm hole
Well I know it's a basicly a horrible description. But I have 12mm holes and I need to line this up mm perfect and mark another piece before drilling it out.
Any ideas.
-
7th December 2022 06:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th December 2022, 06:49 PM #2
depending what your holes are already in, use a cover plate.
as in if holes are on flat timber, tape a thin piece ply over both holes and mark out on it.I would love to grow my own food, but I can not find bacon seeds
-
7th December 2022, 10:01 PM #3
The easiest method to transfer dowel positions is to use "dowel markers" or "dowel marking points."
Haron have 6, 8 & 10mm - Centre points Archives - Haron
but I'm sure if you search around you will find 12mm versions on the 'net.Mobyturns
In An Instant Your Life CanChange Forever
-
9th December 2022, 01:50 PM #4
8pcs Dowel Centre Point Pin Set 6/8/10/12mm Dowel Tenon Center Set Transfer AU | eBay
12mm centre points for marking here on the above link.Johnno
Everyone has a photographic memory, some just don't have film.
-
9th December 2022, 09:25 PM #5
If you have one to hand, a 12mm forstner bit will do in a pinch... provided they're not stopped holes.
- Andy Mc
Similar Threads
-
Punch 12mm hole in 8-10mm steel
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 13th December 2019, 06:20 AM -
Drill hole in MK3 work centre for router microadjuster
By jnorris235 in forum TRITON / GMCReplies: 3Last Post: 4th October 2019, 03:20 AM -
Ryobi 3-in-1 air nailer leaves big mark next to the nail hole
By LittleTommy in forum HAND TOOLS - POWEREDReplies: 11Last Post: 23rd September 2016, 09:29 PM -
Centre punch mark magnifer
By neksmerj in forum METALWORK FORUMReplies: 15Last Post: 18th July 2007, 01:59 PM