Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 46 to 46 of 46
Thread: NAF - Flute Makers
-
18th July 2011, 10:47 PM #46
Hi Rog
Yes you are on the right track.
You could use your router handheld with a fence.
It would be easier with a router table.
It can be a simple as a thick sheet of ply wood or a piece of laminex covered mdf like is used for kitchen bench tops. The mdf is thicker, about 40mm so it wont bend.
The wood working is not too difficult.
Cut enough boards to make a few flutes. It doesn't take much longer to rout them but it is useful when it comes to tuning.Scally
__________________________________________
The ark was built by an amateur
the titanic was built by professionals
-
18th July 2011 10:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
MOlding flute material
By ohno in forum MUSICAL INSTRUMENTSReplies: 7Last Post: 12th September 2007, 09:18 PM -
Any Recorder or Flute makers on the list?
By Sebastiaan56 in forum MUSICAL INSTRUMENTSReplies: 10Last Post: 3rd August 2007, 11:27 AM -
Matching 16mm dia Bullnose and Flute???
By jon46089 in forum ROUTING FORUMReplies: 3Last Post: 14th April 2007, 12:26 PM -
Box makers and pen makers
By Jedo_03 in forum BOX MAKINGReplies: 1Last Post: 9th November 2006, 10:52 PM