Thanks: 0
Needs Pictures: 0
Results 16 to 18 of 18
Thread: Advice on under-bed drawers?
-
30th July 2018, 07:47 PM #16
Just a minor update.
Finally got a cable for the phone so here's how the basic base looks for those who were interested. The drawers are still on the honeydo list, as is a timber slab bed head.
Meh. It's another pic that doesn't want to rotate right way up.
- Andy Mc
-
30th July 2018 07:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th July 2018, 09:58 PM #17GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
Put the drawer on wheels and put guide wheels inside the frame that run against the drawer sides to keep it straight. Most divans with built in drawers have the drawers across the bed two each side and use wood or HDPE runners but they can be a bit fragile if pulled out and not supported near the end of travel. Just the length of these drawers will dictate they be on wheels. Though the long slides used in 4WD are damned strong I think there would be enough droop that the drawer end would drag on the carpet.
CHRIS
-
5th August 2018, 05:00 PM #18Senior Member
- Join Date
- Apr 2012
- Location
- Thornton NSW
- Posts
- 456
The heavy duty full extension slides would more than handle it. 1500mm slides rated at 227kg still support 125kg at full extension. The price, about $300 per drawer. The ones Bunnings sell are only 90kg rated and should be avoided. If you don't need full extension you can use shorter runners and save a bit. It may also be possible to use top hung sliding door runners if you are a creative thinker.
Similar Threads
-
Drawers with slide in bottoms - advice please
By Lappa in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 9Last Post: 18th July 2017, 09:15 PM -
Small drawers in cabinet, advice on clearance needed
By Bendigo Bob in forum WOODWORK - GENERALReplies: 3Last Post: 11th July 2016, 08:29 AM -
Chest of Drawers advice needed.
By DSEL74 in forum WOODWORK - GENERALReplies: 41Last Post: 6th July 2016, 09:07 AM -
Advice needed on antique chest of drawers restoration
By MurrayM in forum RESTORATIONReplies: 7Last Post: 13th March 2014, 04:37 PM -
Advice required on how to cut drawers
By beeroll in forum WOODWORK - GENERALReplies: 3Last Post: 14th October 2010, 09:08 PM