Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 23
Thread: Round table with wings
-
25th June 2013, 12:18 AM #1
Round table with wings
I was in the middle of building a cabinet for our bedroom, suddenly a job came up. Someone wants a round table made so too bad the cabinet can wait.
This is an interesting project and some parts are quite challenging. For example cutting the top accurately (3 pieces remember, not as easy as cutting from a single piece). Having a huge cabinet sitting in the middle of the work are is tricky too.
Still a bit to go so I cannot relax just yet.
The hinges are imported from Horton Brasses inc (Horton Brasses Inc. - Reproduction Hardware for Furniture & Cabinetry) .Bloody top hinges they are.
Oh oh the timber is Tas Myrtle.
P6240011.JPG
P6240005.JPG
P6240001.JPG
P6240010.JPG
P6240007.JPG
P6240014.JPG
P6240013.JPGVisit my website at www.myFineWoodWork.com
-
25th June 2013 12:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th June 2013, 06:58 PM #2SENIOR MEMBER
- Join Date
- Jun 2007
- Location
- Blue Mountains
- Posts
- 813
Looking good Wongo. Is there edge banding on the table top? If so, how was it applied?
cheers,
ajw
-
26th June 2013, 12:23 AM #3... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,084
Very nice.
I would have temporarily fastened the three pieces for the top together to mark out the circle. Is there a better way?
-
26th June 2013, 12:56 AM #4
You are right John, there is no better way. Adding to that, the hinges need to be installed first, then screw the 3 pieces together (on the waste side), then cut the circle.
Visit my website at www.myFineWoodWork.com
-
26th June 2013, 12:59 AM #5Visit my website at www.myFineWoodWork.com
-
26th June 2013, 01:08 AM #6... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,084
-
26th June 2013, 01:42 AM #7
Ooer! I've a fondness for drop-leaf tables.
It's a bit hard to guess from the pix; how do you plan to dress the hinged joints? Simply butt the leaves together when closed... or are you going whole hog and routing/coving them to "pretty up" the hinge line when opened? (If you know what I mean? )
- Andy Mc
-
26th June 2013, 07:17 AM #8
I think it's called a rule joint Skew, and I was wondering the same thing. And I think it is called a gate leg table Of course you can call it anything you like Wongo Looking good so far
Those were the droids I was looking for.
https://autoblastgates.com.au
-
26th June 2013, 09:12 AM #9
An alternative to the rule joint is the mitre. It is very attractive and easy to do. The mitre is not cut to a point but a 4-5mm flat is left. When the leaf is down a small 5x5 rebate shows with the barrel in the rebate. I couldn't find any links.
Cheers, Bill
-
26th June 2013, 10:10 AM #10
I took the easy way so it is a simple butt joint. Thanks.
Visit my website at www.myFineWoodWork.com
-
26th June 2013, 06:24 PM #11
Nice job Wongo. That Tassie myrtle is a beautiful looking timber. I haven't worked with it myself yet, but it's definitely on the to do list.
Good to hear you found some good hinges, it's ridiculous how hard they are to find, especially at a reasonable price. Those hinges also got a mention in the latest AWR mag.
PeterThe time we enjoy wasting is not wasted time.
-
26th June 2013, 06:55 PM #12
a good looking table - really nice
Can you imagine what I would do if I could do all I can? -- Sun Tzu
-
28th June 2013, 04:11 PM #13
Fair enough... As you'd mentioned that you cut the top in one piece I was curious about how you'd approached it if you were using a rule joint.
Looks like the myrtle has some nice patches of figure, too. Should come up very nice!
Thanks, mate. A rule joint, eh?
- Andy Mc
-
28th June 2013, 04:24 PM #14
Thanks. Tassie Myrtle is so pretty. Sadly it is very hard to find these days. Luckily I had some tucked away from a while ago. I still have 6 matching stools to make. After that it will be none left.
AWR is how I knew about the hinges too. Good reviews bring good business I guess.Visit my website at www.myFineWoodWork.com
-
28th June 2013, 04:37 PM #15
Skew, I did consider using rule joint but I “ruled” it out because,
1. I did not want to buy the router bits for the job.
2. The leaves are very narrow. I was worried that it would get damaged easily. I did not want to take the risk.Visit my website at www.myFineWoodWork.com
Similar Threads
-
Small round table
By nihilism in forum WOODWORK PICSReplies: 4Last Post: 20th July 2010, 11:58 PM -
Little round kitchen table
By knucklehead in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 4Last Post: 7th October 2008, 02:48 AM -
Round side table
By Tex B in forum WOODWORK PICSReplies: 7Last Post: 19th August 2008, 06:50 PM -
round kitchen table
By conjoe in forum WOODWORK - GENERALReplies: 1Last Post: 28th August 2006, 04:23 PM -
Round table
By Marc in forum WOODWORK - GENERALReplies: 5Last Post: 14th April 2005, 12:59 PM