Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Hercus 9 motor
-
18th March 2015, 08:18 AM #1New Member
- Join Date
- Mar 2015
- Location
- Australia
- Posts
- 1
What motor for a Hercus 9"?
Hi everyone, i'm currently in the process of restoring an old 9" i got from an old tech school.
Of the many things needing attention is a new motor. I've been trying find a suitable replacement to bolt directly to the existing motor mount plate but am having no luck finding something with a matching bolt pattern.
Measuring the bolt pattern i come up with 124x86 mm. This roughly corresponds to 4 7/8" by 3 3/8". As far as i know the mount plate is the standard H-frame mount, as shown here:
http://australianmetalworkinghobbyis...00-500x500.jpg
Does anyone know what the frame size/motor designation is required for these old lathes? I'd like to use a single phase motor as it's all i have available.
Thanks,
Alex.
-
18th March 2015 08:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd March 2015, 06:46 PM #2New Member
- Join Date
- Dec 2006
- Location
- nsw
- Posts
- 3
Have you contacted AMH? was talking to them about a new motor for a 260.
-
22nd March 2015, 07:14 PM #3SENIOR MEMBER
- Join Date
- Nov 2005
- Location
- adelaide
- Posts
- 667
suggest looking at royce cross in adelaide but i reckon amh will be just as good he ( Mal) specializes in replacement hercus stuff http://australianmetalworkinghobbyis...tegory&path=36
-
22nd March 2015, 09:53 PM #4GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
If it really matters ask Hercus as you should have,otherwise put what ever fits and works.
-
3rd April 2015, 05:17 PM #5Senior Member
- Join Date
- Jan 2009
- Location
- colyton
- Age
- 74
- Posts
- 207
Similar Threads
-
Hercus Motor
By Zenoah in forum THE HERCUS AREAReplies: 17Last Post: 6th March 2013, 09:07 PM -
Motor for Hercus 9"
By Clubman7 in forum THE HERCUS AREAReplies: 6Last Post: 19th April 2012, 03:54 PM -
Hercus 260 ATM motor ID
By BrassMonkey in forum THE HERCUS AREAReplies: 6Last Post: 1st November 2011, 10:25 AM -
Hercus lathe motor details
By neksmerj in forum METALWORK FORUMReplies: 5Last Post: 25th May 2007, 04:53 PM