Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Hercus 9 Spindle Lock
-
22nd December 2017, 01:50 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,431
Hercus 9 Spindle Lock
The subject of how to best lock the spindle so you can undo a stubborn chuck comes up quite often. I purchased a model AR with teeth missing on the bull gear and the back gear, probably due to the previous owner using the back gear to lock the spindle and giving the chuck a good whack. I guess we have all done it.......Anyway, I have come up with a simple method that seems to work and puts minimal strain on things. I came up with this idea, but I would not be surprised if I'm not the first one, so please don't think I am claiming originality. I'm putting it up on the hope that others may find it useful, and/or make some improvements, which we can all benefit from.
The 'too'l is made from 4mm steel plate, thick enough to fit between the bull wheel and it's neighbouring gear. The plate has a slot cut in it to fit around the casting in the bull wheel. The tool fits around this casting and stops the bull wheel from rotating when the tool fouls with the headstock casting. Yes, this is a bit rough on the casting, but I use a piece of wood to soften the impact on the paint work - which seems to work OK for me. I have a 1943 model C, which has plain bearings, so the headstock casting is different to my AR - the tool works fine on both machines. I guess the photos do a better job of telling you how it works than my words do.
I have also attached a drawing of the tool. I originally used 6mm plate because it is a better fit, but the slot fouled with the spring steel holding the bull wheel locking plug, so I milled a recess in the plate to accommodate the spring steel part. Again, you can see this in the photo, but I reckon 4mm plate would solve this problem, without the need to mill anything. I'm sure that if you give this a go, you will soon work out your own version of the dimensions.
Spindle lock 1.jpg
Spindle lock 2.jpg
Spindle lock 3.jpgSpindle lock 3A.jpg
Hercus spindle lock plate.pdf
Attached Images
- Spindle lock 1.jpg (46.9 KB)
- Spindle lock 2.jpg (46.4 KB)
- Spindle lock 3.jpg (24.2 KB)
- Spindle lock 3A.jpg (21.6 KB)
Attached Files
- Hercus spindle lock plate.pdf (153.2 KB)
Read the full thread at metalworkforums.com...
-
22nd December 2017 01:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Hercus Craftsman Spindle Help!
By anj909 in forum THE HERCUS AREAReplies: 2Last Post: 3rd February 2015, 07:54 PM -
Hercus 260 spindle bearings available
By jb1248 in forum THE HERCUS AREAReplies: 1Last Post: 14th February 2012, 02:05 PM -
Triton router spindle lock will not disengage
By bargeman in forum ROUTING FORUMReplies: 3Last Post: 31st May 2011, 06:54 PM -
Hercus Mill Gib Lock
By Pete F in forum THE HERCUS AREAReplies: 9Last Post: 13th May 2011, 03:13 PM