Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
3rd November 2018, 12:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
A pair of 260AT will be following me home tomorrow, my first Hercus
Hi guys,
I have just become a member of the Hercus community.
I have been searching for a lathe for my son to continue his interest in metalwork at home, and after a summer long search I finally found something that will fit into our modest shop. I found a pair that came out of a high school and are a 260AT and a 260ATLH, both working when removed this summer, one of them slowly creeps out of low range into high range, hopefully just an adjustment, the other one runs perfectly. Comes with 5 or 6 chucks, mix of 3 and 4 jaw, face plates, lives centers, drill chucks, and a few other misc goodies, as well as all documentation and some cool old training slides for an overhead projector. As these are just AT, not ATM, I assume M means metric, so these should be imperial? There are some gears new wrapped in oil paper, hopefully they are for this lathe and will allow metric threading. I also think that the ATLH is a slightly longer machine, and hardened ways? I have been researching Hercus for a few days now and have learned a lot, this site is amazing. We are in western Canada and I think these were pretty commonly found in high schools here. They seem to be well looked after, I haven't seen them yet as it's a 10 hour round trip but have made the deal and they will be helping me load them tomorrow with a forklift into the box of my truck. Hope they both fit, full size Dodge Ram 1 ton with 6' box.
I have attached few pics of them where they sit in storage. I'll update more tomorrow after I get home, will be a long day driving thru mountain passes, hope for no snow.
Cheers
01111_LUUeyk93oW_1200x900.jpg00k0k_hF1d2Y1NroR_1200x900.jpg00G0G_amX3iIxQFE3_1200x900.jpg
Attached Images
- 01111_LUUeyk93oW_1200x900.jpg (72.2 KB)
- 00k0k_hF1d2Y1NroR_1200x900.jpg (67.5 KB)
- 00G0G_amX3iIxQFE3_1200x900.jpg (130.0 KB)
Read the full thread at metalworkforums.com...
-
3rd November 2018 12:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Hercus Tool and cutter grinder auctioned tomorrow in Cairns
By Graziano in forum METALWORK FORUMReplies: 5Last Post: 2nd July 2010, 11:34 PM -
Beyond tomorrow
By Wongo in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 27Last Post: 16th February 2006, 08:01 PM