Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Fine scrolling
-
12th November 2018, 07:34 PM #1Senior Member
- Join Date
- Jun 2007
- Location
- Orange NSW
- Posts
- 264
Fine scrolling
After many years of scrolling I thought I knew a fair bit but now realize I still have a bit to learn yet.
I was cutting a very fine pattern in Kari Pine and worked through blades progressively getting finer because the cuts were to aggressive and I was loosing control. I was down to a jig saw blade ( very fine ) and still had trouble so I blunted the blade by using a diamond file to take the edge off the blade. It worked and I was able to carry on with my project with confidence and no mistakes.
This piece of information just might assist others who have had the same problem.
John
-
12th November 2018 07:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Scrolling acrylic
By LiliB in forum SCROLLERS FORUMReplies: 6Last Post: 9th February 2012, 03:00 AM -
Not quite fine woodwork, but fine wood.
By derekcohen in forum WOODWORK PICSReplies: 13Last Post: 30th January 2009, 09:52 PM -
timber for scrolling
By spring in forum TIMBERReplies: 3Last Post: 21st May 2007, 05:59 PM -
new to scrolling
By crazysambo in forum SCROLLERS FORUMReplies: 3Last Post: 21st March 2007, 10:16 PM -
Scrolling in Alberta
By whitewolf710 in forum SCROLLERS FORUMReplies: 1Last Post: 22nd August 2006, 05:59 PM