Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22
  1. #16
    Join Date
    Apr 2009
    Location
    Eltham
    Posts
    5

    Default Success!!!!

    Picked up a replacement bearing from the shop in Campbellfield ( not new but looked OK). Have reassembled my scroll saw and tried it out. Certainly runs a lot better with no vibration and very little noise. Still not happy with the cutting though ( One and a half inch thick pine). Watched another club member cutting one inch thick redgum on a Hegna saw that was cutting like a hot knife through butter, using the same blades.
    Will try a new blade on the weekend and keep an eye on the bearings - maybe a little machine oil?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #17
    Join Date
    Sep 2008
    Location
    Geelong West
    Posts
    59

    Default

    Try a bit of hardwood.Pine tends to clog the teeth gap and drag.Or try less teeth on blade
    Anyone home?

  4. #18
    Join Date
    Aug 2007
    Location
    Newtown Geelong
    Posts
    1,878

    Default

    How much was the bearing? also how big is this place and do they have much stock.I phoned them once and couldn't get a positive answer,and was given another phone number to ring on Saturday
    Back To Car Building & All The Sawdust.

  5. #19
    Join Date
    Apr 2009
    Location
    Eltham
    Posts
    5

    Default RE: Ghebrial Power Tools

    Hi Aussie,

    It is a fairly large shop selling just about anything going in workshop machinery and tools. I have never seen so many GMC tools and household stuff. They have lots of other brands as well. The bearing cost $10 and the the metal bracket that holds them on the link arm was $5. Both obviously used but in good condition. I called them in the morning and they were reluctant (or too busy) to discuss details over the phone, prefering you go there with the broken piece or the tool for their mechanic to see, and help if possible. The service was good, pricing on the part "ad hoc" and I think he suggested they did not have another but I may have mis-heard, need to check?


  6. #20
    Join Date
    Jun 2015
    Location
    Queensland
    Posts
    7

    Default

    I am posting here in the faint hope that anyone is still monitoring this thread. "8-)

    I have been given one of these GMC 16" scroll saws. I don't have a model number, but it looks a lot like this - Home Suppliers 4 U - GMC 200W 405mm (16&#39 Variable Speed Scroll Saw with REDEYE $234.95 - except that it has a flexible air hose on the right and a flexible light on the left. I say 'has an air hose', but the problem is the hose has been taken off by the previous owner, to use on another machine.

    I have found a web site selling flexible air hoses - modularhose.com - Loc-Line 1/4" ID System Hose/Line - , but need to know the thread size and type. According to my verniers, the aperture is ⅜", which is mystifying because the only sizes sold at that size are ¼, ½, ¾ and so forth.

    I would be REALLY grateful if anyone can tell me what size hose and type of fitting I need. While we are about it, did anyone ever get a bearing part number for this beast, as discussed above?

    Thanks in advance for any help.

    Cheers,
    Doug.

  7. #21
    Join Date
    Dec 2004
    Location
    Moonta Bay in the Copper Triangle, S. Australia
    Posts
    822

    Default

    Quote Originally Posted by Doug Hutcheson View Post
    I am posting here in the faint hope that anyone is still monitoring this thread. "8-)

    I have been given one of these GMC 16" scroll saws. I don't have a model number, but it looks a lot like this - Home Suppliers 4 U - GMC 200W 405mm (16') Variable Speed Scroll Saw with REDEYE $234.95 - except that it has a flexible air hose on the right and a flexible light on the left. I say 'has an air hose', but the problem is the hose has been taken off by the previous owner, to use on another machine.

    I have found a web site selling flexible air hoses - modularhose.com - Loc-Line 1/4" ID System Hose/Line - , but need to know the thread size and type. According to my verniers, the aperture is ⅜", which is mystifying because the only sizes sold at that size are ¼, ½, ¾ and so forth.

    I would be REALLY grateful if anyone can tell me what size hose and type of fitting I need. While we are about it, did anyone ever get a bearing part number for this beast, as discussed above?

    Thanks in advance for any help.

    Cheers,
    Doug.
    To be of little help but very honest, I don't bother with a blower. I hook up an old household vac to a length of clear soft tubing, and I've stuck a black irrigation right angle into that, to suck up all of the top deck sawdust. Underneath on the lower deck, a specially cut out milk bottle catches what falls through. By using a vacumn cleaner, I have very little dust bothering my sinuses and blowing all over the shop. Some of the dusts made by scrolling can be very fine and can also affect your well being.
    Buzza.

    "All those who believe in psycho kinesis . . . raise my hand".

  8. #22
    Join Date
    Oct 2008
    Location
    Leopold, Victoria
    Age
    65
    Posts
    4,677

    Default

    Quote Originally Posted by Doug Hutcheson View Post
    I am posting here in the faint hope that anyone is still monitoring this thread. "8-)

    I have been given one of these GMC 16" scroll saws. I don't have a model number, but it looks a lot like this - Home Suppliers 4 U - GMC 200W 405mm (16') Variable Speed Scroll Saw with REDEYE $234.95 - except that it has a flexible air hose on the right and a flexible light on the left. I say 'has an air hose', but the problem is the hose has been taken off by the previous owner, to use on another machine.

    I have found a web site selling flexible air hoses - modularhose.com - Loc-Line 1/4" ID System Hose/Line - , but need to know the thread size and type. According to my verniers, the aperture is ⅜", which is mystifying because the only sizes sold at that size are ¼, ½, ¾ and so forth.

    I would be REALLY grateful if anyone can tell me what size hose and type of fitting I need. While we are about it, did anyone ever get a bearing part number for this beast, as discussed above?

    Thanks in advance for any help.

    Cheers,
    Doug.
    From those dimensions of the thread I would say it is 1/8" NPT which is one of the sizes that they sell for connecting the tube to your machine. The Kit has the 1/8 connector at the bottom of the list of parts.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Wire feed problems "need help"
    By Stufart in forum WELDING
    Replies: 6
    Last Post: 14th April 2008, 07:44 PM
  2. Electrical problems with my JET 16"
    By dai sensei in forum BANDSAWS
    Replies: 12
    Last Post: 17th December 2006, 03:34 PM
  3. Review: WMS 18" Scroll Saw - 2 Speed
    By oges in forum SCROLLERS FORUM
    Replies: 2
    Last Post: 1st December 2006, 05:35 AM
  4. RYOBI 16"SCROLL SAW SC-160
    By XXJJJXXX in forum SCROLLERS FORUM
    Replies: 3
    Last Post: 20th June 2005, 05:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •