Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
6th April 2003, 12:34 PM #1Novice
- Join Date
- Feb 2003
- Location
- metung victoria australia
- Posts
- 13
Help...................................
Got my new scroll saw blade holder thingys and when i insert them and blade in the machine and go to tension them the blade just slips out ........... I have tightened them as much as i can . put less tensoin on machine but the blade just slips out when i try to cut.............. they are gmc clamps............
thanks
grahamlove my shed
-
6th April 2003 12:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th April 2003, 10:45 PM #2
Graham there are a couple of possible causes
The blades may be oily I usually sand the ends of the blades with 220 sandpaper to help grip.
Check the faces of the holders are square to each other if not touch them up with a small file or take em back and get them replaced.
Also a bit of metho to clean the holders as they may be oily too
hope this helps
PeteWhat this country needs are more unemployed politicians.
Edward Langley, Artist (1928-1995)