Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Triton scroll saw help
-
12th April 2019, 11:25 AM #1
Triton scroll saw help
thought it better here than Triton page.
was shifting SWMBO's Triton scroll saw that has sat in same place for 4 years + and yea gawds the dust underneath it.
So... my thinking is dismantle it cut holes/slots somewhere and put a bell mouth dust extraction pipe under the holes/slots then hooked up to the dusty system.
But how do I dismantle it? any ideas.... will this even work?I would love to grow my own food, but I can not find bacon seeds
-
12th April 2019 11:25 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th April 2019, 12:09 PM #2SENIOR MEMBER
- Join Date
- Feb 2016
- Location
- Perth WA Australia
- Posts
- 829
IMO probably won't increase efficiency that much and you'll be better off running just a vacuum.
If you're really worried about fine dust create an over head arm above the scroll saw and run the dusty on that duct.
-
12th April 2019, 01:10 PM #3
vacuum wont cut the ice mate
the blades are pushing the dust down therefore trying to suck it from above is wasteful.
But I figure this.... find where it need to sit/work, enlarge holes in base of scroll saw(big holes), cut a hole in MDF benchtop, place 100mm bell mouth into hole connected to rest of dust system and sit scroll saw on top.
This allows plenty of room for dust to fall, plenty of lateral air movement.I would love to grow my own food, but I can not find bacon seeds
Similar Threads
-
Triton jigsaw/scroll
By Ecna in forum TRITON / GMCReplies: 4Last Post: 21st October 2011, 04:36 PM -
Triton Scroll Saw
By *Kev in forum SCROLLERS FORUMReplies: 8Last Post: 31st August 2011, 07:27 AM -
TRITON SCROLL SAW any one used it
By horse123 in forum SCROLLERS FORUMReplies: 15Last Post: 6th July 2009, 11:11 PM -
triton scroll saw
By powder monkey in forum TRITON / GMCReplies: 1Last Post: 7th May 2009, 10:20 PM -
Triton Jig/Scroll Saw
By Kirwilli in forum TRITON / GMCReplies: 66Last Post: 6th February 2006, 10:34 AM