Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
1st October 2015, 08:31 PM #1Senior Member
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 330
Suitable adhesive for bonding aand jioning Melamine faced particle board
I understand in the commercial cabinet field a special adhesive is used when joining Melamine faced Particle Board when assembling Cabinet Carcasses. That is when joining melamine faces to particle board edges as would occur at vertical and horizontal joints.
Can any one advise what the adhesive they generaly use.
I understand Bostic market a product for the industry.
Cheers
Malcolm Eaton
-
1st October 2015 08:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st October 2015, 09:52 PM #2
I have always used AV56. Its a latex glue which you use in the same way as PVA. Its about the same consistency and cleans up with a damp cloth. See if you can AV56 in clear. It dries clearish and is not as unsightly as the normal that dries to a mustard yukky colour. If you want to test it out get a couple of offcuts of the Melamine board joined together with AV56, give it a couple of days to really cure then pull the joint apart......the melamine will still be stuck to the glue but the board will have chunks taken out.
I just buy mine from our local hardware in townJust do it!
Kind regards Rod
-
1st October 2015, 10:51 PM #3
-
18th February 2016, 08:59 PM #4Senior Member
- Join Date
- Jul 2008
- Location
- geelong
- Posts
- 359
Mostly cabinets are not glued at all. However AV 56 works very well. (probably other brands out there too but haven't used myself)
Similar Threads
-
Adhesive for glass to particle board.
By Mychael in forum GLUEReplies: 15Last Post: 16th June 2011, 09:16 PM -
Particle board edges - What to do?
By RobTro in forum WOODWORK - GENERALReplies: 16Last Post: 14th March 2009, 07:26 PM -
Cleaning up particle board
By peterdeck in forum WOODWORK - GENERALReplies: 6Last Post: 30th April 2008, 11:08 PM -
MDF or Particle board ?
By JackG in forum WOODWORK - GENERALReplies: 7Last Post: 9th November 2005, 02:39 AM