![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Likes](https://www.woodworkforums.com/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 41
Thread: wax to stop glue sticking?
-
13th September 2010, 10:06 PM #1
Intermediate Member
- Join Date
- Aug 2010
- Location
- Australia
- Posts
- 38
wax to stop glue sticking?
Hi guys.
Im trying to stop lams from sticking to the form, from the squeeze out. i've been told wax is ideal - is there a specific wax? what should i be looking for? or can i literally grab a candle and drip wax on it?
sorry, probably a stupid question but i have been looking and can't find anything...
Thanks!
T
-
13th September 2010 10:06 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th September 2010, 10:16 PM #2
Dripping?
Not quite the same situation, but I have used plain wax candles like crayons and simply "coloured in" the areas I didn't want glue (or finishes) to stick to.
- Andy Mc
-
13th September 2010, 10:27 PM #3
Intermediate Member
- Join Date
- Aug 2010
- Location
- Australia
- Posts
- 38
Thanks Skew.
I was going to light the candle and drip it on the form so that it soaked in... can the wax be lightly sanded away from the contacting timber once it comes out of the form? seems pointless to wax up the form, only to get it onto the final face of the timber - if the finish won't stick...
-
13th September 2010, 10:42 PM #4
As I said, I haven't used it in your situation. I think.
I often clamp waste blocks in position as "temporary formers" and wax these so they don't stick after unclamping. I can't say I've ever had any real problems with removing any wax off the finished surfaces.
But are you cold-pressing the laminates or steaming/heating them first before clamping them in the forms? I'd imagine that if you're forming heated timber then there'd probably be significant wax transfer, enough to warrant more than a "light sand" to remove.
Sorry I'm not of more help...
- Andy Mc
-
13th September 2010, 11:06 PM #5
Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 2,114
I have used end sealing wax . The sort we put on the end grain of fresh cut logs .
The drawback in some steam bending situations is that , yep , the wax can transfer to the piece being laminated and stuff up further gluing and finishing .
The better way might be to line the inner side of the molds with a plastic strip
-
13th September 2010, 11:37 PM #6
If laminating cold, then rub the side of a candle over what ever you don't want getting stuck.
If steam bending, then the heat will make the wax transfer onto the laminations. In that case, I would use polyethene sheeting..
I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.
Regards, Woodwould.
-
14th September 2010, 09:44 AM #7
Intermediate Member
- Join Date
- Aug 2010
- Location
- Australia
- Posts
- 38
Hey guys!
Thanks heaps for your advice, i will be laminating... so no heat. Sorry i should have mentioned that.
I have been doing more research this morning, a few forums have been raving about baking paper... the type that is 'wax like' on one side... apparently it is also good to use.
Ill try both and let you know which works best)
Thanks again guys, greatly appreciated.
T
-
20th September 2010, 06:58 PM #8
Wax will work, I find it better to cover the former with packaging tape, that is the very fine stuff used for wrapping parcels etc., that will stop your glue and laminations sticking to the former. then you don't have to worry about wax transferring or whether the wax needs replacing.
Regards
-
20th September 2010, 08:18 PM #9
I was just about to say packing tape, too - at least thats what works for me when fibreglassing a subwoofer enclosure in a car boot!
-
21st September 2010, 09:30 AM #10
I use Carnuba wax to stop glue from sticking to frames or cauls, works really well & is soft & easy to apply with a cloth & i have it in my cupboard. Bunnys sell is as well as many Mitre 10 & Home & hardware stores.
-
21st September 2010, 10:08 AM #11
-
22nd September 2010, 07:44 PM #12
I use brown shiny packaging tape. It works fine.
Rocker
-
26th September 2010, 06:07 PM #13
Intermediate Member
- Join Date
- Aug 2010
- Location
- Australia
- Posts
- 38
Thanks guys! i gave it a go this weekend using some perafine wax?! (something along those lines) so we'll see by morning.
On the opposite end of the scales, what glue is best suitable for bent laminations? Unfortunately today i buggered $100 of nice cedar because the glue i was using dried before i could finish gluing up my lams. the glue i used was called bondcrete (recommended by a timber expert specifically for lams).
I was gluing up 9 x 2.5mm x 1.8 mtr lams, i used half a bottle (500ml), it still wasn't enough glue (no squeeze out) and it was dry by the time i got to clamping. That's what i call a mass fail
Any ideas, education and anything else going would be greatly appreciated ;-)
thanks guys!
T
-
26th September 2010, 06:47 PM #14
Banned
- Join Date
- Jun 2007
- Location
- Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
- Age
- 69
- Posts
- 2,114
T , Tell us a bit about the project that you are working on .
What is it , what is it intended for and what wood are you using .How tight is the radius , and what are the dimensions and how long are the timbers that you are bending ?
-
26th September 2010, 07:16 PM #15
Intermediate Member
- Join Date
- Aug 2010
- Location
- Australia
- Posts
- 38
Hey - sorry MJ - i should probably have started with that.
I'm trying to replicate this image (link above), but in miniature - as a baby bouncer. I'm using WR Cedar, the radius of the bend is approx 2.5 - 3 inches and the total length of the lamination's (support legs) is 1.8mtrs, i am cutting the lams to about 2.5mm and prepping the bend with a slightly steamed timber to start - clamping it till it dries, then gluing up. the width of the lams are about 50mm and hoping to get them to 45mm after cleanup.
This is the first time I've tried this, and to be honest i thought I'd get it first go... so was a little disappointed after failing today. I don't have a jointer to square up the timber, or a thicknesser or drum planer - so once i have cut all the lams, i lay them out to make a wide sheet - then give them a light hand sand to minimise the ridges caused be the band saw.
A dry run prooves to be OK (as in no gaps between lams - not perfect)... but i it just takes too long to get the glue on all 9 lams before glue up.
Thanks, hope all this makes sense. I will post some pictures of it later in the week when i get a chance to swing by the shop. the half dried lams are still clamped - going to leave them till end of week and just see what the result is...
T
Similar Threads
-
Sticking foam rubber
By Tools in forum UPHOLSTERYReplies: 5Last Post: 7th May 2010, 08:58 PM -
sticking drawers
By Gordo78 in forum WOODWORK - GENERALReplies: 15Last Post: 11th July 2006, 11:39 PM -
Sticking Router Collet
By silentC in forum ROUTING FORUMReplies: 18Last Post: 24th September 2003, 10:56 AM