Results 1 to 11 of 11
  1. #1
    Join Date
    May 2010
    Location
    Wellington, NZ
    Posts
    550

    Default Left-field router option?

    My old hitachi M12V is on its last legs. I bought it cheaply and well used several years ago, and it now only goes when all the stars align and following several minutes of wiggling the speed controller and swearing.

    I mainly use it in a table, or on a sled for flattening boards (using bigger diameter bits for the latter), and have never used it for plunge cuts. It's a pain to adjust depth on the table, and I like the accuracy I can achieve with my ancient 1/4" skil fixed base router. So ideally, I would like a 1/2" variable speed fixed base router with some fine adjustment capabilities. Which doesn't seem to exist here. The second hand market is pretty grim, mainly single speed plunge makitas and hitachi, usually in pretty poor condition.

    However, I found this on aliexpress: https://www.aliexpress.com/item/Fixe...604317652.html

    It seems to tick all of the boxes for what I want, without any of the compromises I'd need to make buying what's on offer here. I did a bit of research on the brand, and it seems to be built for the south east Asian industrial/professional market by a large OEM (which makes Skil and apparently some product for the big brands).

    Is this a bonkers idea? Anyone think I should take a punt?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    1,014

    Default

    Reckon you should have a punt... mainly so the rest of us know if it's any good

    Not too pricey - Around AU$300 landed, and the reviews seem reasonably positive (although the 2nd one doesn't have very good english for a yank... which is a little sus!)

  4. #3
    Join Date
    May 2010
    Location
    Wellington, NZ
    Posts
    550

    Default

    I know the seller's good. I bought a baseplate and set of template guides off them, and was impressed with the quality of those.

  5. #4
    Join Date
    Oct 2005
    Location
    Sydney
    Posts
    49

    Default Another Option

    I notice that there's also another router at https://www.aliexpress.com/item/1800...3-c22c1ceee318.

    It's cheaper than the other one and more powerful too -- more in line with your old Hitachi.

    I wonder if anyone here has bought one.

  6. #5
    Join Date
    May 2010
    Location
    Wellington, NZ
    Posts
    550

    Default

    Quote Originally Posted by Gassito View Post
    I notice that there's also another router at https://www.aliexpress.com/item/1800...3-c22c1ceee318.

    It's cheaper than the other one and more powerful too -- more in line with your old Hitachi.

    I wonder if anyone here has bought one.
    My needs are for something a bit lighter and more manoeuvrable for edge work, but still good for table use.

    I have ordered the fixed base one and will post an update when it arrives...

  7. #6
    Join Date
    Oct 2005
    Location
    Sydney
    Posts
    49

    Default

    Thanks...will wait for your verdict.

  8. #7
    Join Date
    May 2010
    Location
    Wellington, NZ
    Posts
    550

    Default

    Well, the router (the Devon one in the original post) turned up today, and first impressions are that my gamble has paid off.

    Fit and finish is excellent, and everything fits together precisely and accurately. It's solidly built with thick, quality plastics and nicely machined castings. The soft start and speed control both work smoothly and there isn't a hint of vibration when it runs. If it was blue and had "Makita" or "Bosch" written on the side, you wouldn't bat an eyelid.

    It's easy to adjust depth very accurately, and it has a few nice features like LED lights to illuminate the cutting area and good shrouding (with a built-in vacuum port). The only little criticism is that the supplied edge guide feels a bit flimsy (quite at odds with the construction of the rest of the tool), but it should do the job fine.

    Next step is to use the thing in anger. If it performs as well as it looks like it will, I'll be very happy.

  9. #8
    Join Date
    Oct 2005
    Location
    Sydney
    Posts
    49

    Default

    Can't wait!

  10. #9
    Join Date
    May 2010
    Location
    Wellington, NZ
    Posts
    550

    Default

    Used it last night to do a few rebates. Nothing particularly challenging, but it performed flawlessly. Quite impressed really: it's a genuinely good piece of kit.

  11. #10
    Join Date
    Oct 2005
    Location
    Sydney
    Posts
    49

    Default

    Great! I'll order one tomrorrow.

    A big thank you!

  12. #11
    Join Date
    May 2010
    Location
    Wellington, NZ
    Posts
    550

    Default

    Hope you like it!

Similar Threads

  1. Replies: 14
    Last Post: 6th February 2017, 03:16 PM
  2. left field question
    By maddog 62 in forum TIMBER
    Replies: 4
    Last Post: 5th September 2011, 09:34 PM
  3. From left field
    By specialist in forum METALWORK FORUM
    Replies: 1
    Last Post: 3rd December 2010, 10:54 PM
  4. Here's one straight out of Left-Field!
    By Batpig in forum HAND TOOLS - POWERED
    Replies: 16
    Last Post: 29th August 2008, 08:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •