Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 19 of 19
Thread: Table Mount 3612C
-
27th November 2008, 06:26 PM #16Senior Member
- Join Date
- Feb 2008
- Location
- sydney, au
- Posts
- 192
Hi Malb,
No, you are not barking up any tree and I appreciate you taking the time to mention safety issues on the forum.
The router is new out of the box and that was how the lead was coiled. I switched it on briefly twice to test it before I disposed of the packaging....
The lead would not be set that way when I finally get to fire it up.....
Most of my routing at the moment is done with the Triton TRA001set in the table.
James
-
27th November 2008 06:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th November 2008, 06:58 PM #17Intermediate Member
- Join Date
- Sep 2008
- Location
- AlphaCentauri
- Posts
- 36
James, thanx for the pix. Am off later to the hardware to get me a dust cover. Am sure tho that I'll probably have to make my own.
Would you guys reckon that a 12mm thick aluminum plate as a base is overkill? I can get that thickness for free - thinner and I'll have to fork quite a few bucks.
-
30th November 2008, 06:01 PM #18Senior Member
- Join Date
- Feb 2008
- Location
- sydney, au
- Posts
- 192
12mm thick aluminum plate
I don't believe you will have any problem with a 12mm plate except that you would lose some bit height.
I believe the commercial plates are around 9mm.
Some of the members have probably made their tables and plates from aluminum so you are sure to get more good advice.
James
-
1st December 2008, 05:35 PM #19Intermediate Member
- Join Date
- Sep 2008
- Location
- AlphaCentauri
- Posts
- 36
Thanx all.
Regards.
Similar Threads
-
Makita 3612/3612C
By jw2170 in forum ROUTING FORUMReplies: 9Last Post: 6th September 2008, 10:48 PM -
Triton MOF001 mount to table
By Gunnaduit in forum TRITON / GMCReplies: 26Last Post: 21st August 2008, 02:27 AM -
How to table mount Makita 3620 router?
By mkat in forum ROUTING FORUMReplies: 16Last Post: 29th April 2007, 03:35 PM -
Mounting Makita 3612c under table
By Smed in forum ROUTING FORUMReplies: 30Last Post: 2nd September 2005, 11:16 PM -
3612c
By sandman in forum ROUTING FORUMReplies: 5Last Post: 9th June 2004, 05:03 PM