Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
14th January 2019, 09:28 AM #1GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
What's special about this trim bit?
New to this game, so I may be missing something: What's so special about this trim bit that justifies the $60+ price tag?
https://www.bunnings.com.au/diablo-1...r-bit_p6370465
I can get a bit that seems to be similar spec and does the same job from Axminster in the UK - $20, and even with 4 day international delivery it still comes out a few bucks cheaper.
https://www.axminster.co.uk/axcalibe...aring-ax803281
Is this just a case of the usual Aussie shafting or does the Diablo have some feature I don't recognise?
-
14th January 2019 09:28 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th January 2019, 09:51 AM #2
The bit you linked to is a 1/2" shank whereas the Axminster bit is 1/4". Most of the other Diablo flush trim bits are around the $30 mark even in 1/2". Not sure why that one is so expensive as there is one that has a longer cutting area and it is only $37.63.
Dallas
-
14th January 2019, 09:52 AM #3
The Diablo is 1/2” cutting diameter whilst the Axcaliber is 1/4” so not really a fair price comparison.
I did a quick search on Bunngs and the only Diablo trim bit I could find with a 1/4” shaft is this one but it’s still 1/2” cutting diameter not 1/4”.
Total Tools have a 1/4” Carbitool trim bit for $30Cheers
DJ
-
14th January 2019, 09:54 AM #4
That question is right up there with “why does a Toyota ute cost $15k more than a Great Wall?”
Diablo router bits are made by Freud, who in my opinion are number 2 in the world (but only just, CMT just pip them). Excaliber router bits are made in an unknown Chinese factory, or factories.
It boils down to much better quality carbide that can take and hold an edge better, closer manufacturing tolerances, better quality bearing and a coating that doesn’t let glue or resins stick. It means the bit can be spun at higher speeds thus giving a better cut surface needing little or possibly even no finishing. For a hobbyist it also means that you will probably never need to replace that cutter ever.
Saying that, a Great Wall will take rubbish to the tip too!Nothing succeeds like a budgie without a beak.
-
14th January 2019, 10:04 AM #5GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,034
Not much; one is made in Italy and one is made in China; one is sold by a hardware retailer that offers 'lowest prices' and one is sold by a specialist woodworking supplier that sources good quality products and puts their own brand on them. If you want to buy Australian look for Carbitool and if you want the very best router bits from China look for the Arden brand. You'll always pay more for a European, USA or Australian made bit.
Despite what others have said a 1/2" shank, 1/2" cutting dia. bit with cutting length of 1" is $20 on the Axminster site, so size wise the two bits are very comparable.
-
14th January 2019, 10:21 AM #6GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,016
Thanks all - as noted, you can select the shank size on Axminster's site, so the two bits are comparable from that point of view. Both 1/2 inch
The comments about manufacturer and materials are very helpful. I have a few Axcaliber bits, and they all seem to work well, but I have nothing to compare them with, and they haven't had a huge amount of use. I think I'll get a carbitool and a diablo for my next two bit purchases, and report back in 20 years.
-
14th January 2019, 11:31 AM #7
Just get the Carbitool, you won't regret it!
After the pain of seeing burn marks from a easily blunted "Cheap" bit, the price difference does not make a difference, when you factor in the pucker factor.Pat
Work is a necessary evil to be avoided. Mark Twain
Similar Threads
-
Does anyone have any tips for using a trim router to trim melamine edging?
By Tccp123 in forum WOODWORK - GENERALReplies: 12Last Post: 18th December 2018, 07:10 AM -
Trim, trim and more trim
By skmelvin in forum RESTORATIONReplies: 1Last Post: 3rd October 2016, 03:15 PM -
A special order , for a special person
By gawdelpus in forum WOODTURNING - PEN TURNINGReplies: 8Last Post: 29th April 2015, 06:55 PM -
A special pendant as a special gift.
By Sturdee in forum WOODTURNING - GENERALReplies: 6Last Post: 3rd June 2013, 05:28 PM