Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: these 150mm ports
-
17th June 2018, 09:09 PM #1
these 150mm ports
from my limited experience and not seeing it for the past 12 years (in storage) most of my machinery have 100mm ports and yet your all raving about 150mm opening and pipework etc
So then how does one make bigger outlets? using angle grinders on cast iron bodies? I dont think so, how about the std metal cases that band saws, table saws have...how are they enlarged..
dont worry theres a lot more Q coming......as per 'my shed' thread the time has finally come yahooooI would love to grow my own food, but I can not find bacon seeds
-
17th June 2018 09:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th June 2018, 09:22 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
Yep - no problems - CI cuts like butter under a thin kerf cutting wheel in an angle grinder.
Cut a 170 x 170 mm square hole and around the port and patch it with a piece of sheet metal with a 160 mm hole and a female PVC fitting
Better still would be a bell mouth hood exit.
how about the std metal cases that band saws, table saws have...how are they enlarged..
Before you reinvent the egg, have a read through the forum as there is heaps on this topic.
EG
Improving machine cabinet dust ports.
Look at how John Samuel modified all his machines.
Making 150mm DC ports for workshop machines
-
18th June 2018, 11:05 AM #3SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
I used a jig saw with metal cutting blade to cut a 6" hole in the base of my cabinet saw - worked well.
-
18th June 2018, 11:37 AM #4.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
The other useful tool for making a holes in metal is a "nibbler". I used a Makita nibbler to cut a 150 mm hole in a combination machine. The steel was 4mm thick but the nibbler had no problems cutting through it.
Remember you con't need to be able to cut a round hole. Its easier to cut a square one and then patch it with some lighter gauge material.
-
14th July 2018, 08:17 PM #5
further to this....where do I buy 150mm PVC flanges etc? ie as in a flange that will screw/fix to the body work and have a connection (?) for hose to fit.
Saw in Bunnies the other day in kitchen section concertinaed aluminium 150mm tubing that expands to 3 meters its designed for oven hot air extraction but I figured it should work for dust as well.... thoughts?I would love to grow my own food, but I can not find bacon seeds
-
14th July 2018, 09:23 PM #6.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
The quickest and most expensive way is to purchase the 150 mm version of this floor flange
https://www.bunnings.com.au/holman-1...lange_p4750174
But Bunnings don't sell them and I would never buy any PVC pipe or fittings from them
You will need to go to a Specialist PVC pipe supplier (not a Plumbing Supplier) to find then .
I get my stuff from this mob
Pipe Online - Retic Fittings , Plumbing Fittings, Reticulation Supplies supplied Australia wide
Some folks say that even with shipping to the eastern states they are cheaper than what they can buy them for on the east coast.
If you can find the 150mm version f the Floor flange make sure you are sitting down when they tell you the price.
Even then they are not ideal which is why its better to make your own.
You should have a read of this thread (Improving machine cabinet dust ports) all the way through and you will get lots of ideas about home made flanges also how to make quick connect and disconnect 150 mm hose fittings.
Posts #81 and 111 shows a home made flanges from PVC pipe.
Bear in mind that most efficient flange is the Bell Mouth Hood and there are posts in that thread that show how to make these.
At a minimum you can always make a basic flange using a square piece of MDF and cut a hole in the middle the same size as teh OD for 150mm ducting and glue in a piece of 150 mm PVC pipe.
-
14th July 2018, 09:39 PM #7
-
14th July 2018, 09:41 PM #8Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
150mm floor flanges are not that dear
https://plumbingsales.com.au/150mm-f...lange-dwv.html
-
14th July 2018, 11:08 PM #9.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
-
14th July 2018, 11:12 PM #10.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
-
15th July 2018, 05:29 PM #11
As posted elsewhere had a win (well I thought so in Adelaide this week) had been thinking around this dust collection and what I could afford, the limited power available etc etc and had settled on a Leda DC1500T then bingo just before buying brand new, up popped a S/H on gumtree less than half price...so grabbed it.
now the 2x4" ports are already off getting ready to make a 6". If I replace top bag with pleated filter will it it make a worthwhile difference, what if I coonect it to a cyclone somehow will that also help. Yes I'll be changing over to 6"" outlets on all power tools where possible. My 'dreams do come true' thread has been attacked by SHMBO (sometimes) and I now have supposedly 4m x 7+meters. I hope to run drill press, RAS, thickneser, jointer down one length and my 9 year old unopened table saw TSC10-HB in the middle.Q regarding table saw, I think this is a cabinet ...if so can I change the frame so free standing and ease/improve dust collection underneath....
so many questions, only one frayed head... good night sweet dreamsI would love to grow my own food, but I can not find bacon seeds
Similar Threads
-
Making 150mm DC ports for workshop machines
By John Samuel in forum DUST EXTRACTIONReplies: 117Last Post: 29th January 2023, 04:15 PM -
WDS-400 dust ports
By cjbfisher in forum DUST EXTRACTIONReplies: 2Last Post: 7th July 2020, 10:23 PM -
Inspection ports.
By Flatdog in forum Michael Storer Wooden Boat PlansReplies: 11Last Post: 16th June 2012, 01:09 AM -
inspection ports or hatches
By uncletoby boats in forum BOAT BUILDING / REPAIRINGReplies: 1Last Post: 30th May 2008, 11:01 PM -
Inspection ports
By Daddles in forum BOAT BUILDING / REPAIRINGReplies: 1Last Post: 17th July 2006, 10:13 AM