Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2011
    Location
    Brisbane
    Age
    43
    Posts
    98

    Default Floor fan ventilation

    Of late I have been thinking that I need a bit of workshop ventilation, in part for dust and in part to make life more comfortable. I was wondering if anyone has any thoughts on using an industrial floor fan, building a shroud around it (so it can't recirculate too much air) and mounting it to a window. I'm assuming this would work about as well as an oversized exhaust fan.

    I was thinking of something like the following at a claimed 124 cube / min.

    https://www.machineryhouse.com.au/F026

    They also have a larger model but that would require embiggening the window.

    I want something big as my workshop is technically the underneath of my house, a single open space (though built in) which is a good 250 odd cubic meters, ie small extractors wont make much of a dint in air turnover.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Feb 2015
    Location
    Strathalbyn South Australia
    Posts
    1,141

    Default Floor fan ventilation

    Bob would be the best person to chime in on this, but start with info on hydroponics fans. They are way more efficient than a standard fan and take up way less room.


  4. #3
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Just to put some numbers on the table, and drawing from memory ...

    To control dust you want about 20 air changes per hour, so for a 250 cubic metres volume, you need to move about 5000 cu.m per hour.
    3 of the largest vans above would achieve that rate. Given their size, they could be installed through a "hole in a wall".
    Of course, if you're pulling 5000 cu.m from a space, you need to pull in the same amount from a clean (and during summer cool) area.
    regards from Alberta, Canada

    ian

  5. #4
    Join Date
    Aug 2007
    Location
    Saskatoon, SK, Canada.
    Posts
    1,439

    Default

    You could use something like that but you have to fit it into the window and then protect it from the weather when you aren't using it. Better in my opinion is a shuttered fan like the ones used in barns and greenhouses. When on the shutters open and when off, close to keep the weather and birds out. They will cost more though but that is offset by not having to fit the portable into an opening.

    Pete

  6. #5
    Join Date
    Dec 2011
    Location
    Brisbane
    Age
    43
    Posts
    98

    Default

    I agree with 5000 m3/hr and I have seen the 20 volumes number, it's what made me start looking at big fans including things like 16" car radiator fans.

    but by my calcs

    3 x 12" fans = ~5250 m3/hr, 945 W and roughly $1000?
    1 x 450mm fan = 124 m3/min (7500 m3/hr), 165 W and roughly $100

    it would have to run at about 70% of advertised value before it hits the hydroponics fans advertised value... which does seem very possible (especially with a bit of dust on their blades) but I haven't been able to find anything on how accurate inline fan values are.

    As for cool air my plan is to locate it on the afternoon sun side of the house and pull air from open windows on the shaded side. the window that I was going to attach it to is actually an old glass louvered window so if it rains I can always close it (though rain never blows in on that side of the house unless hell is rising).

Similar Threads

  1. sub floor ventilation
    By huc in forum FLOORING
    Replies: 5
    Last Post: 24th March 2006, 11:30 AM
  2. sub floor ventilation
    By magnet 12 in forum FLOORING
    Replies: 2
    Last Post: 14th December 2005, 08:10 AM
  3. Sub Floor Ventilation
    By Markw in forum FLOORING
    Replies: 1
    Last Post: 9th November 2004, 09:22 AM
  4. sub floor ventilation
    By fletch in forum FLOORING
    Replies: 5
    Last Post: 6th April 2004, 12:13 PM
  5. Replies: 7
    Last Post: 17th March 2004, 01:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •