Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
30th October 2011, 02:21 PM #1GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Portable dust separator - test run
Here are the photos for the test run of my portable dust separator. All comments are welcome on the dust buildup on the baffle plate at the end of the test.
Only 80% of the dust sucked up went in to the separator. the restr ended up in the DC bag
Not a good resultregards,
Dengy
-
30th October 2011 02:21 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th October 2011, 07:17 PM #2
Hi Jill, Is the inlet and outlet the right way around? Looks back to front to me.
Brian
-
30th October 2011, 08:58 PM #3Deceased
- Join Date
- Jun 2008
- Location
- ocean grove
- Posts
- 120
Hi Jill,
I've built four of these separators, and, on each one, the vacuum is applied to the centre fitting at the top. All mine work well, so, as has been suggested, your hoses are probably connected the wrong way round. Change them, and see how it tests then.
-
30th October 2011, 09:11 PM #4GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Oooops..... How embarrassing is this!!
Many thanks Brian and adebenregards,
Dengy
-
1st November 2011, 12:00 PM #5GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Well, I swapped the hoses around on top of the separator, and it worked fine. I put through 1500gms of sawdust from my table saw separator ( plywood sawdust, and dado cuttings from plywood), and 96% by weight was captured in the separator. The hose to the dust extractor was quite clean inside.
whew.....regards,
Dengy
Similar Threads
-
Wheelie Bin Dust Separator
By Jim Grant in forum DUST EXTRACTIONReplies: 34Last Post: 4th March 2024, 10:59 AM -
My portable dust separator
By Dengue in forum DUST EXTRACTIONReplies: 5Last Post: 1st November 2011, 09:22 PM -
$49.00 cyclonic dust separator
By Morbius in forum DUST EXTRACTIONReplies: 5Last Post: 1st November 2010, 01:24 PM -
Bin for Carbatec dust separator lid
By Dengue in forum DUST EXTRACTIONReplies: 13Last Post: 21st November 2009, 05:35 PM -
Carbatec Dust separator lid
By Dengue in forum DUST EXTRACTIONReplies: 6Last Post: 6th May 2009, 07:01 AM