Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
24th June 2018, 01:13 PM #1Senior Member
- Join Date
- May 2016
- Location
- Melbourne
- Posts
- 193
Powertran VFD help with connections please
Hi All,
I have a PowerTran VFD installed on my Clearvue and have a problem remembering what terminals I was using to control the VFD with a remote control.
I have attached a picture below of the terminal block does anyone know what terminals I short out to make the VFD turn on??
file-15.jpg
Thanks
Joel
-
24th June 2018 01:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th June 2018, 01:57 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
You should post what model Powtran you have.
On the PI9130, PI160 and PI130 its DI1 and COM.
The source of run commands needs to be set and the parameter controlling DI1 needs to be set to FWD.
-
24th June 2018, 02:51 PM #3Senior Member
- Join Date
- May 2016
- Location
- Melbourne
- Posts
- 193
-
24th June 2018, 06:54 PM #4Senior Member
- Join Date
- May 2016
- Location
- Melbourne
- Posts
- 193
Similar Threads
-
QLD.Swap QLD Looking for timber connections
By Luke Maddux in forum TIMBER SWAPReplies: 4Last Post: 1st September 2015, 01:16 AM -
Connections for air compressor
By Tiger in forum HAND TOOLS - POWEREDReplies: 6Last Post: 25th August 2005, 06:15 PM -
Dusty connections
By Spindleshanks in forum HAND TOOLS - POWEREDReplies: 4Last Post: 18th July 2005, 03:00 PM