i am going to get 3 resin saver molds from newlondon88 in the next couple of weeks which will have to go into a medium flat rate box from the US which i believe will allow room for another 5 or 6

if anyone is interested in getting some molds as well then let me know and we can split up the postage

the molds are US $55 each and he makes them for
Siera
Cigar
Jnr Series - gents, majestic etc
full size - gents, majestic etc
Baron/Sedona
Squire

let me know if you are interested

MIK

__________________
No Result Without Effort

MIK I've seen resin saver molds mentioned on the forum, can you explain the term to a newbie like me please.

thanks
undies

the resin saver molds can be used in a number ways but the basic thing it does is save on resin because the resin goes straight onto the tube rather than having to waste the drill holes

i used the resin save mold here

les in red derr uses them to cast his flies here which is a better example because what you see in the first pickie is what comes out of the mold

i think charlie said that you use around 1 ounce which in our language is around 25grams of resin to a casting

each resin saver mold has 4 sets of holes, sorry i don't have a pickie at the moment if everyone wants to see on i will get a pickie tomorrow night and post it.

i hope this helps

MIK

__________________
No Result Without Effort

found a pickie

Attached Images

MoldSeries.jpg (40.0 KB, 275 views)

__________________
No Result Without Effort

Ahhhhhhhhhhh the light has come on now, it was your post about your myrtle surprise that I remember the term from and now I understand, thank you very much for that...........I now need to convince the LOML SWHMBO that I can afford it.............how long till you need an answer?

BTW I loved your myrtle surprise..........and I now know what WW is.........lol

thanks
undies

I've had many people ask me if they can modify the molds to pour one tube. They were
looking to make a silicone 'dam' between the cavities.

At first I wasn't sure why, since we're only talking about 25g of resin. But I can see where
it would add up if you're only doing one Sierra at a time, but doing a lot of them.

Now that I'm experimenting with double casting, I find I need to pour one tube fairly often.
So .. the first time I poured two tubes and I just saved the one I didn't use. When I need
to pour just one pen, I put this other half (already cured) back in the mold to take up the
space. Now I can pour one Sierra with under a half ounce of resin. Then the hardest
part is measuring that small an amount

So .. make one double and save half of it as a spacer. It should last forever.

Damn, Mik , I have JUST ordered two from him just yesterday.. see if he can do us a deal..

__________________
I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
Kev

send newlondon a pm to say that you want to add them to my order to save on postage

i am sure he will have no probs at all

__________________
No Result Without Effort

Got the message, no problem there

Just noticed on IAP that Charlie has his 4 for 3 offer going again. I made use of his last offer, bit of saving there.

__________________
Cheers Fred
Rifle Cartridge Pen Kits Closed End Pen Mandrel Sander Mill Router Table for Incra LS Steelmaster Lathe

Yep.. I just put an ad up there a little while ago. I can extend that offer here, too.
If you want to combine orders and put it in under one person's name and shipping
address, that's fine. Sometimes I can add onto a friend's silicone order and get
their discount, so I can do the sale once in a while. Problem is I never know when..

I'll confirm a little later today, but i might be in for a sierra and a jr gent mold

I'll pull out of this one, none for me thanks

thanks for the offer charlie, makes it easy for everyone

i am in for 3 unless any of those new molds have come available in which case it may be more

Brudda is in for 2??? i think
Minus459 is in for one

just need a couple more

next weekend is the order date so you still have time to think it over

__________________
No Result Without Effort

MIK - Cigar, Jnr Gent, Baron
Brudda is in for 2??? i think
Minus459 - Siera
Reece - Siera, Jnr Gent

that makes 8 so now we start on the next set of 4 any takers??

__________________
No Result Without Effort