Closed end Sierra Mandrel Tutorial

sturina · #1 8th Jan 2012, 06:37 PM

Nai's homemade closed end Sierra mandrel is now in PDF format.

Nai84 · #2 8th Jan 2012, 08:56 PM

Hey Stuart looks awesome thanks for doing that for me just hope it usefull to someone like was for me Ian

cookie48 · #3 9th Jan 2012, 09:44 PM

This is what make this forum such a great place. Thanks for that sturina. Will give it a crack.

HazzaB · #4 10th Jan 2012, 12:06 AM

Hey Ian,

You don't say anything about fitting the Transmission grippy thingy into the end of the Tube before you glue in the Blank, do you fit that later ??

HazzaB

Nai84 · #5 10th Jan 2012, 12:52 AM

Hey harry the way it works is still the same way as normal turning so once the tube is glued in and has been trim back with the barrel trima you but the bush the sleeve and the nut on the Mandrel and the slid the nut inside the tube follow by the sleeve and then tighten the Mandrel up until it sits flush with bush does that make any cents pic attached Ian