Originally Posted by
BozInOz
I had trouble with the parallel guide joining the chop on the leg vices. Both joints have moved a little. The original/current joint is a through tenon with two wedges. Relatively good construction but the pressure is considerable.
I had the option to remove the joint, clean it and re-set it. However as I used titebond III it will make a mess even if I drill out the wedges. I thought of inlaying the inside corner with a metal brace. I'll need to adjust the leg mortise.
I'm not keen to remake the parallel guide as there is a lot of drilling involved and a decorative end piece.
...