Page 2 of 11 FirstFirst 1234567 ... LastLast
Results 16 to 30 of 163
  1. #16
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Quote Originally Posted by Chief Tiff View Post
    I think I've got it now; the strips form the feet and are about about an inch thick?
    Just a bit over half an inch actually, Chief. The leg levelers do not actually interact with the ironbark at all, just pass through the hole drilled through them into the red gum.

    Quote Originally Posted by Chief Tiff View Post
    That new Triton blade; is it a true triple chip that leaves a flat bottomed cut? If so; where did you get it from please?
    That's what they are sold as but in reality the raker blade is a fraction shorter than the right and left teeth so the cut is not quite flat bottomed. I got quite a few of these blades probably 10 or more years back when Triton was in receivership between ownership changes. The receivers were selling off accessories at giveaway prices. That was one of the two new triplecut blades I had left.

    Quote Originally Posted by Chief Tiff View Post
    Looking forward to seeing the completed trestles.
    Me too but it won't be today - competing priorities. Tomorrow is not looking good either, I have to go on a little expedition with my chainsaw and come home with another trailerload of free timber. Its a dirty thankless job but someone has to do it. Anyone know any good uses for Apple and Pear wood?

    CHeers

    Doug
    I got sick of sitting around doing nothing - so I took up meditation.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #17
    crowie's Avatar
    crowie is online now Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    Bit late but looking forward to the finally result....make me feel like i actually got to the get together

  4. #18
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Its been a while since I did anything on the workbench. Health problems got in the way for a while then I took a little sidetrack into some blacksmithing/knife-making skills. When you get an opportunity like the one I got to broaden the skillset into something that I had been interested in for a long time, well the only sensible thing to do is to grab ti with both hands.

    Anyway, just as I was about to get back into the workbench build a potential disaster struck. Our landlord is putting the house on the market so all projects are on hold until we either move or find out we can stay.

    Hopefully we may get to stay. If so I hope to get back to the build pretty much straight away. If not then as soon as I am set up in a new shed.

    In the picture you can see how it will look if you imagine the shoulder vise over the third leg of the left trestle and the tail vise on the right hand end. It is hedl together by gravity in that pic of course, but its not to far off to have the trestle/base completed (the stretchers all fit into the trestles now ) and for the main parts of the top to be all laminated together.

    I will post another update once the house problem is resolved and I get back to it.

    Apologies to anyone who has been hanging by their fingernails waiting for progress.

    CHeers

    Doug
    Attached Images Attached Images
    I got sick of sitting around doing nothing - so I took up meditation.

  5. #19
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    10,810

    Default

    Well Doug, the base looks great, but the top needs a bit of levelling

    How did I miss this build when you started? I'll keep an eye out now.

    Sorry to hear about your ill health and the nasty landlord. Let us know how you fare.

    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  6. #20
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Quote Originally Posted by derekcohen View Post
    Well Doug, the base looks great, but the top needs a bit of levelling
    Thanks Derek. You forgot to mention that the ends still need trimming and squaring ready for the endcaps

    Yes there is still plenty of work to go but it is coming along slowly.

    Cheers

    Doug
    I got sick of sitting around doing nothing - so I took up meditation.

  7. #21
    Join Date
    Aug 2010
    Location
    Horsham Victoria
    Posts
    5,713

    Default

    Following now

    DaveTTC
    The Turning Cowboy
    Turning Wood Into Art

  8. #22
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    I managed to find some available time when my back was not too bad to make a bit of progress over the last couple of days.

    I had been working on both the base and the top for a while, just putting sub-assemblies together, dressing and laminating stock to prepare for the next stages etc. The other day I decided I need to concentrate on the base until it is finished.

    All the major components of the base are pretty much cut out and the majority of the joinery is cut. The biggest thing left to finish was the means of securing the long stretchers between the two trestles with bolts. I had already (long ago) drilled the bolt holes through the trestles and into the stretchers but had not made allowances for the nuts.

    I put a 2" forstner bit in the drill press and drilled a hole in each end of the two stretchers - like this:

    20180411_164427.jpeg

    Last Saturday I got the lathe out and turned a length of 2" redgum dowel to match the holes. I cut the dowel into lengths equal to the depth of the holes and cut part of the circle away to create a flat surface for the washer and nut to seat against and glued the redgum disks into the holes:

    20180411_173752.jpeg

    I then drilled through the disks and mortised out enough clearance space to get a spanner onto the nut and it all goes together nicely.

    20180412_130856.jpeg

    I put all the bolts in and it holds the base together very squarely and rigidly - and the trestles haven't been glued yet.

    20180412_142847.jpg

    I glued up a panel out of two glued up panels recycled from an old Ikea bed to make the shelf to go between the stretchers. Ikea say it's Baltic Pine or something but it looks just like crapiata. I cut up another Ikea glued up panel back down into its component strips to make the cleats to support the shelf. Once the shelf components are sorted I can clean up all the parts of the base, do the glue-up and then apply a finish. If all goes well the base may be finished this weekend.
    Last edited by doug3030; 13th April 2018 at 02:32 PM. Reason: pictures did not load properly
    I got sick of sitting around doing nothing - so I took up meditation.

  9. #23
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,973

    Default

    Pics I can not see [emoji85]


    Sent from my iPhone using Tapatalk

  10. #24
    Join Date
    Oct 2011
    Location
    Langwarrin
    Age
    43
    Posts
    952

    Default

    Neither can I....so it's not just that Matt is technologically special....(unless both of us are)
    "All the gear and no idea"

  11. #25
    Join Date
    Jun 2010
    Location
    Bundaberg
    Age
    54
    Posts
    3,402

    Default

    I have the same issue with not seeing photos. Oddly enough, the Email alert I received has hyperlinks in the text where the pictures should be; but clicking on those brought up error messages anyway.
    Nothing succeeds like a budgie without a beak.

  12. #26
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Ok so - How many of you guys that can't see the pictures are using I-things?
    I got sick of sitting around doing nothing - so I took up meditation.

  13. #27
    Join Date
    Oct 2014
    Location
    Caroline Springs, VIC
    Posts
    1,645

    Default

    I can't see the pic on my winblows machine with chrome. looks like the pics are linking directly to your email account.

  14. #28
    Join Date
    Jan 2011
    Location
    shep Victoria
    Age
    97
    Posts
    421

    Default

    I'm wearing glasses and I can't see either.

  15. #29
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    4,200

    Default

    Ok I have edited the post above so that hopefully the pictures now show. Here's a couple of bonus pictures.

    I had to do a little modification to the washers or deepen the mortise - modifying the washers involved less risk of making a hole right through the stretcher onto the more visible front face. It also gave me an opportunity to play with another expensive toy

    20180412_140608.jpg

    The panel I glued together to make the shelf for between the stretchers - recycled Ikea bed parts made from "Baltic Pine" - (Crapiata Scandanavia)

    20180412_174845.jpg
    I got sick of sitting around doing nothing - so I took up meditation.

  16. #30
    Join Date
    Jun 2010
    Location
    Bundaberg
    Age
    54
    Posts
    3,402

    Default

    That's better; the pics all show now!

    I'm intrigued by your new toy; worrizit? It look too skinny for a normal linisher
    Nothing succeeds like a budgie without a beak.

Page 2 of 11 FirstFirst 1234567 ... LastLast

Similar Threads

  1. The long build
    By ivanavitch in forum TOY MAKING
    Replies: 10
    Last Post: 9th October 2017, 07:47 AM
  2. A temporary workbench to build a workbench on
    By doug3030 in forum THE WORK BENCH
    Replies: 5
    Last Post: 23rd October 2016, 07:46 AM
  3. Replies: 10
    Last Post: 15th September 2012, 08:51 PM
  4. Long general purpose workbench
    By Aussiephil in forum THE WORK BENCH
    Replies: 7
    Last Post: 10th June 2011, 11:03 AM
  5. Overdue Review....
    By Rob Lee in forum HAND TOOLS - UNPOWERED
    Replies: 8
    Last Post: 5th October 2008, 06:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •