Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    Nov 2007
    Location
    Victoria
    Posts
    731

    Default Roy Underhill style Roubo Workbench WIP

    My Roy Underhill & 'Little John' MacQuire Workbenches inspired Vic Ash/Tas Oak Roubo. After poorly building a Tage Frid bench and then a bolted together crapiata number with an MDF top I came to the conclusion a stout rectangular bench would be best for me as long as I share single car garage with the actual car. Last pic shows the space I have to work with....
    In between these other benches I've used a Japanese style bench (2 sawhorses + 1 plank) which is very serviceable even with western style tools and even better to drag out into the sun on a nice day.

    Following Roy's dimensions (available online) fairly closely - 1500 long x 450 wide. Although I wont have a tool well, just slots on the far edge for chisels in use etc and also not planning to have a tool box between the rails. I'm thinking of making the rear rail higher than the other 3 so I can wheel my Dad's tool chest (seen in last pic) or a knee height saw bench/horse in and out.

    Got the base M & T'd yesterday. Yet to be glued up - I want to be sure everything's ok before progressing. So far the joints have been cut by hand but I cross cut the legs on the SCMS. The legs are finger jointed which I picked up cheaply, not ideal from a visual perspective but structurally sound. The rails are 190 x 45 F17.

    Was pretty nervous about the sliding dovetail connection between the legs/top and seriously considered alternatives but I cut a quick test joint yesterday in some scrap cypress I'm more confident with my marking out now.

    The top is glued up, roughly 360 wide x 45 thick with another 90 x 45 glued on as a front rail. End caps will be 90 x 45 too.

    Vice wise I guess a leg vice is the default but after working on a plank for a while I'm considering just using hold downs. Is a leg vice good for holding pieces vertically ? Never can find the answer to that. Mostly for tenons more so than dovetails.

    Thanks for looking,

    Sam
    Attached Images Attached Images

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2009
    Location
    brisbane, australia
    Age
    58
    Posts
    87

    Default

    I love it!......there is something quite simple, rustic and honest about this one!! looking forward to seeing how it evolves. cheers szcz

  4. #3
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,058

    Default

    Quote Originally Posted by szczepan4069 View Post
    I love it!......there is something quite simple, rustic and honest about this one!! looking forward to seeing how it evolves. cheers szcz
    Nice job. Keep the WIP coming Sam.

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  5. #4
    Join Date
    May 2007
    Location
    North of the coathanger, Sydney
    Age
    68
    Posts
    9,417

    Default

    finished yet?
    regards
    Nick
    veni, vidi,
    tornavi
    Without wood it's just ...

  6. #5
    Join Date
    Nov 2007
    Location
    Victoria
    Posts
    731

    Default

    Um....No

    I have moved the frame to where the bench will sit when finished does that count as progress ?

  7. #6
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,058

    Default

    Quote Originally Posted by Sam View Post
    Um....No

    I have moved the frame to where the bench will sit when finished does that count as progress ?
    From my perspective, most definitely .

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  8. #7
    Join Date
    May 2007
    Location
    North of the coathanger, Sydney
    Age
    68
    Posts
    9,417

    Default

    Quote Originally Posted by Sam View Post
    Um....No

    I have moved the frame to where the bench will sit when finished does that count as progress ?
    blood oath
    regards
    Nick
    veni, vidi,
    tornavi
    Without wood it's just ...

  9. #8
    Join Date
    Nov 2007
    Location
    Victoria
    Posts
    731

    Default

    Update - I had two go's at the sliding dovetails over two weekends...neither of them worked out (despite the test piece). Wasted enough time and wood so I've had a change of plan.

    The old top is now useless so half the bench top I picked up from Termimonster is in as a replacement. That bench was 30 thick and 2000 long so I'll trim it down to 1800 which is 300 longer than Roy's plans. I've glued up one 270 wide and a 190 wide piece to form a 60 thick main bench top. The 270 is on top and with a tool tray the overall width will be 450. Which fits in with Chris Schwarz thoughts in his book that your bench can never be too long but it can too wide (fingers crossed). Not altering the base which is 1200 long

    Think I'll use stub tenons or dowels in the top of the legs now. I can trim the dovetail pins on top of the front legs into a tenon, luckily never got to butchering the back legs !

    Looking towards the leg vise I've come across this design which seems straightforward.
    stupidly simple pinless leg vise *LINK* *PIC*

    And also this one which while a little more expensive appears even easier
    Roubo Workbench Leg Vise Alternative – Linear Bearings | The Wood Whisperer

    Any comments on either design ?

    Will post some pics later.

Similar Threads

  1. Pac mans Roubo style WIP- questions and progress
    By Pac man in forum THE WORK BENCH
    Replies: 174
    Last Post: 28th December 2016, 08:21 AM
  2. Replies: 20
    Last Post: 15th April 2013, 10:58 PM
  3. Workbench - Old-style
    By pmcgee in forum THE WORK BENCH
    Replies: 0
    Last Post: 22nd January 2013, 11:32 PM
  4. Roy Underhill swinging an axe
    By rhancock in forum HAND TOOLS - UNPOWERED
    Replies: 22
    Last Post: 21st September 2012, 10:50 PM
  5. Replies: 6
    Last Post: 2nd July 2008, 12:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •