Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 12 of 12
  1. #1
    Join Date
    May 2009
    Location
    FROM WITHIN
    Posts
    45

    Default Conversions and Calculators

    ACROSS FLAT DIMENSIONS OF HEX HEADED BOLT: CLICK HERE
    Shaft Diameter to maximum and minimum sizes in both inches and mm

    COMPLETE PENMAKERS CHART FOR DRILLS AND BUSHES: CLICK HERE
    Match a pen with the mandrel, bushes, drill and blank size.
    Chart made by forum member Artme

    CONVERSION TABLES:
    CLICK HERE

    Automatically calculate all sorts of stuff.....
    Linear, area, volume, weight pressure angle, temperature, wind chill and more.
    Also conversion tables for: Length, area, capacity & weight. Imperial to metric and back etc.

    DRILL SIZE CALCULATOR: CLICK HERE
    Find drill sizes equivalents by:
    Provides drill sizes in 1/64 fractions of inch, with equivalents in decimal, wire number/letter and metric.

    FUEL ECONOMY: CLICK HERE
    Calculate mpg, ltrs per 100k, etc. (imperial measure not US)

    GEOMETRIC: CLICK HERE
    Calculate: Area of Sphere, Cone, Circle.

    SCREW / DRILL SIZES: CLICK HERE
    WOOD SCREWS - Recommended Drill Sizes For use on Australian Hardwoods also
    Wood & Self Tapping Screw Data Use this chart to convert screw diameter to screw gauge number.

    TEMPERATURE:
    CLICK HERE
    Convert: Celsius - Fahrenheit - Celsius - Kelvin, etc

    A BOX MAKERS' RATIO WORKSHEET
    Attachment 104710
    This spreadsheet was developed on the forum as an aid to the design of boxes in pleasing dimensional ratios.
    Contributors were: Big Shed - Barry White - Switt775 - Pusser - Watson


    Last edited by Librarian; 7th April 2010 at 09:50 PM. Reason: Cleaning duties

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Default Abrasives Chart link.


  4. #3
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Default Metalworking Files

    Last edited by ubeaut; 3rd July 2015 at 01:51 PM.

  5. #4
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    Back up two levels - on the main page.

    Also would suggest adding this gem somewhere: http://www.incompetech.com/graphpaper/

    Fred, have I done something to p*ss you off?
    Cheers, Ern

  6. #5
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Default Thread Identification

    Excellent sites for almost everything to do with Metal threads.


    http://mdmetric.com/tech/tict.htm

    http://www.ring-plug-thread-gages.co...ta-charts.html

  7. #6
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Default Wood Screws.

    Check these sites for almost everything about wood screws

    Pilot hole sizes
    http://www.woodbin.com/misc/wood_screw_pilot_holes.htm.pdf[/url]

    http://www.wlfuller.com/html/wood_screw_chart.html

    [url]http://www.ibiblio.org/twa/info/

    Drill bit speed chart for wood:

    http://www.australianwoodsmith.com.au/pdf/28drillbitspeedchart.pdf

    http://www.raygirling.com/dpspeed.htm

  8. #7
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Default Screw fastener chart

    A useful referenc chart for screw type fasteners for metal and wood.

    http://www.boltdepot.com/Fastener-In...ype-Chart.aspx

  9. #8
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Default Screw fastener chart

    A useful referenc chart for screw type fasteners for metal and wood.

    http://www.boltdepot.com/Fastener-In...ype-Chart.aspx

  10. #9
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    76
    Posts
    19,922

    Default Drilling Metal

    Chart for drilling metals: drill size and speed.


    http://www.ultimatehandyman.co.uk/DI..._technique.htm

  11. #10
    Join Date
    Jul 2008
    Location
    Meadow Springs, WA
    Age
    76
    Posts
    574

    Default

    Quote Originally Posted by Librarian View Post
    A BOX MAKERS' RATIO WORKSHEET
    Attachment 104710
    This spreadsheet was developed on the forum as an aid to the design of boxes in pleasing dimensional ratios.
    Google sketchup understand the golden ratio too. When you stretch a rectangle to the golden ratio, it tells you (as it also does for squares).

    thewoodwhisper.com has an introductory tutorial on Sketchup, and a link to a site with several more.

  12. #11
    Join Date
    May 2009
    Location
    Northern NSW OZ
    Age
    75
    Posts
    27

    Post Cutting Speed Calculator

    Cutting Speed Calculator

    Online calculator to calculate the RPM / Spindle Speed by entering the Feet Per Minute cutting speed and the diameter of the stock.

    http://janproducts.com/Speeds_and_Feeds_calculator.html

    Also lists a variety of other available calculators including Bolt Circle, Screw Thread Data, Corner Distance, Tap Feed Rate and others..............



    Tez

  13. #12
    Join Date
    Jan 2005
    Location
    Adelaide
    Age
    65
    Posts
    1,183

    Default Steps Calculator

    I recently Built a deck part way around our A/G Pool, & had to make a set of steps for it.

    I developed this Steps Calculator to make my life a little easier.

    Hope it helps somebody else.

    Steve
    The fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.

Similar Threads

  1. Aussie Wood Conversions??
    By Blazk in forum WOODWORK - GENERAL
    Replies: 24
    Last Post: 7th June 2008, 07:29 PM
  2. various log calculators
    By weisyboy in forum SMALL TIMBER MILLING
    Replies: 0
    Last Post: 5th May 2008, 06:50 PM
  3. LPG Conversions
    By John Saxton in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 36
    Last Post: 21st August 2006, 08:22 AM
  4. Various metric conversions
    By zenwood in forum WOODIES JOKES
    Replies: 0
    Last Post: 12th March 2006, 12:46 AM
  5. Calculations and conversions
    By DaveInOz in forum WOODWORK - GENERAL
    Replies: 0
    Last Post: 10th September 2004, 04:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •