Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
-
19th May 2022, 03:51 PM #1Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
Incra Router Lift with Router And Heaps Of Other AWESOME Router Malarkey
So this is all my router stuff. Please note that this sale DOES NOT include the Incra LS positioner or long fence, that's only shown to give you an idea of my setup.
The Incra lift does what it was designed for, i.e it goes up and down and locks. It's in pretty good condition, no scratches or anything.
The Carbatec router is near new and would barely have 10 hours on it.
The Incra Wonder Fence with the Hi-Rise bizzo is also in good nick. That is mounted on a small Incra fence so that I don't have to keep dicking around with it all the time.
The Shop Stop also works as designed.
The router table, another absolutely awesome creation on my own, is on braked wheels and has a 17mm top made from HD3 which is pretty serious material. It approximately 1.05m by 1.4m and about 880mm high
I think everything else should be self explanatory, except for the right angle thingy which I made a thread about. broom came around to collect the drill press I sold to him and was absolutely frothing over it, can't really blame him to be honest.
Just Something I made As A Test
This all has a replacement value of Approximately $3000 and that only includes a nominal $200 for the table. There's about $500 worth of router bits.
Selling Price is an absolute BARGAIN at only $1750 pickup. I can deliver locally for a small additional contribution, but if you're further away it'll be heaps.
R1.jpg R3.jpg R4.jpg R5.jpg R6.jpg R8.jpg R7.jpg
-
19th May 2022 03:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th May 2022, 03:02 PM #2Member
- Join Date
- Oct 2010
- Location
- Brisvegas
- Posts
- 75
Don't suppose you have a spiral flush trim bit which you would be willing to sell separately?
-
20th May 2022, 03:24 PM #3Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
Nope.
-
20th May 2022, 03:41 PM #4
If you decide to sell things separately, I'd be interested in the Incra router lift and Carbatec router depending on the asking price. Cheers.
-
20th May 2022, 04:26 PM #5Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
Well splitting things up makes things more expensive. For example, the router, the switch and the lift have a new purchase price of approx $1560, I'm not selling those for 50% of replacement costs and would be looking for at least $1100.
-
20th May 2022, 05:56 PM #6
Thanks, but I'll pass at that price as I already have a suitable switch and Timbecon currently have a similar package for $1349 although they don't currently have any in stock. Cheers and good luck with the sale.
-
20th May 2022, 07:54 PM #7Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
$1349 although they don't currently have any in stock
-
20th May 2022, 08:30 PM #8
I'm not saying your asking price is unreasonable. By my calculation, and budgeting around $120 for a similar switch, your asking price is a saving of $400. Even if the Timbecon package were in stock, your offer is attractive enough to entice most people in the market to choose your offering especially those without a router table set-up and all the usual accessories and bits already. I'm just not one of those people. I already have a router table, router lift, switch, assorted router bits, etc. and I would be paying for a lot of things that I either already have or don't necessarily need.
-
20th May 2022, 11:51 PM #9Senior Member
- Join Date
- Aug 2013
- Location
- Mullumbimby NSW
- Posts
- 181
The Jessem Mast-R II router lift for $595 and AUK tools router motor for $575 in stock from Gregory Machinery. I have this setup - terrific improvement.
-
21st May 2022, 09:37 AM #10Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
Thanks Charlie, I wasn't aware of that priced combo.
YUUUUUUUUGGGGE PRICE DROP.
$1300 pickup only.
-
21st May 2022, 11:08 AM #11Member
- Join Date
- Sep 2007
- Location
- Brisbane
- Posts
- 65
@Fekit I have been looking fir a router table for a while but am away for work for another few weeks yet. If you can hold it until mid (ish) June I will take it.
-
21st May 2022, 11:14 AM #12Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
If you're happy to pay for it now or drop a significant deposit, then I can hold it until then.
-
21st May 2022, 11:16 AM #13Member
- Join Date
- Sep 2007
- Location
- Brisbane
- Posts
- 65
That sounds fair. Will PM you now.
-
24th May 2022, 04:43 PM #14Senior Member
- Join Date
- Jun 2015
- Location
- Mexico. Actual Mexico not Victoria.
- Posts
- 418
This item is Sold
Similar Threads
-
SOLD: Incra Router Lift and AUK 1800W Router
By mokuzai in forum WOODWORK - Tools & MachineryReplies: 4Last Post: 10th September 2021, 10:57 AM -
SOLD: Router Lift, Lge C/Iron Table, H/D Stand on Wheels, Triton Router + Loads Router Bits
By aarggh in forum WOODWORK - Tools & MachineryReplies: 16Last Post: 7th November 2020, 02:27 PM -
INCRA/Jessem Mast-R-lift II vs Triton Router with built in lift
By Hooked on Wood in forum WOODWORK - GENERALReplies: 5Last Post: 20th June 2020, 03:56 PM -
VICTORIA Carbatec heavy duty router table plus Hitachi Tr12 with router lift.
By Harmek in forum WOODWORK - Tools & MachineryReplies: 0Last Post: 20th June 2018, 03:48 PM -
Incra, Elu router, Jessum router lift, Arch top raised panel templates
By treepowder in forum FOR SALE on eBay and external sites.Replies: 2Last Post: 31st December 2017, 03:02 PM