Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
-
29th April 2018, 01:38 PM #1Novice
- Join Date
- Jun 2011
- Location
- Sydney
- Posts
- 12
Table Saw, Dust Extractor, Incra Super System and more - Gold Coast QLD
Finally parting ways with all of my woodwork machinery. Times have changed and I no longer have the room or the passion for the hobby unfortunately. See below for the items, detailed link, and costs. Happy to negotiate reasonable prices. Everything located in Gold Coast QLD, more than happy to help arrange pickup etc for anything bar the tablesaw (can't fit that in the car haha).
Apologies for a lot of the photos of equipment being wrapped up in bubblewrap etc, I didn't want to unwrap it all when I could just give links to the equipment itself to show more details and better photos. If you want to come around and inspect I'll be more than happy to unwrap the items.
If anyone is interested in any of the items, please contact me on 0438 610 362. I don't have the best reception at my house, so leave a voicemail if it doesn't ring or send an SMS and i'll get back to you.
Hopefully someone can enjoy and get the most of all this great equipment.
IMG-3946.jpg
Carbatec TS-12R 1 Phase (Used) - $700
www.carbatec.com.au
- Good condition.
- Has never skipped a beat, original motor.
- Comes with riving knife, cast iron wings and mobile base.
- Sawstop blade guard/riving knife/dust extraction (included) has been adapted to work with the tablesaw.
- Does not come with original fence rails or fence.
- Has been modified for 6" dust collection with metal connectors and quick release clamps.
- Has been modified on opposite side of dust collection outlet to allow more airflow to greatly improve dust collection and extraction.
IMG-3951.jpg IMG-3950.jpg IMG-3947.jpg
Clearvue CVMAX Dust Extractor (Used) - $2,000
www.clearvueoz.com.au
- Great condition.
- Has only been used for less than 5hrs run time total.
- Could suck a bowling ball through a garden hose, no, seriously.
- Comes with everything including VFD, except for filters and a trash can/dust bin. I always exhausted outside the garage to atmosphere, a lot quieter this way.
- Impeller surround has been covered in Dynamat sound insulation along with sound deadening carpet to help keep the sound down.
- Unit is seriously quiet at full noise when used with a muffler or insulated HVAC tubing.
IMG-3952.jpg
Incra LS Super System with Wonderfence, 92" rails, XL Version (Used) - $1,000
www.woodworksupplies.com.au
- Near new condition.
- Seriously accurate, repeatable cuts, anytime of the day/week/year.
- Wonderfence system (for router setup) has never been used.
- Comes with all nuts, bolts, brackets, instructions, booklets, extra guides, the lot.
- Once you use this system, you will never look back.
20120415-175808.jpg
Woodpecker Unilift Router Lift (Brand New) - $750
Sorry, no link to website, not made anymore, highly sought after item though.
- Brand new condition, original box and wrapping, never used.
- Specifically made in America for the Australian market, to use with plunge routers.
- Comes with the lift, adaptor plates, sizing rings, all tools and accessories and instructions.
IMG-3949.jpg
SOLD - Incra Mitre Gauge 1,000HD (Used) - $150
www.woodworksupplies.com.au
- Excellent condition.
- Compliments the LS positioning system for super accurate angles and cuts at all times.
IMG-3953.jpg
Woodpecker Tablesaw Gauge (Used once) - $100
www.woodworksupplies.com.au
- As new condition
- Only used once to set up the tablesaw perfectly.
IMG-3954.jpg
CMT Dado Blade Set (Used) - $150
www.carbatec.com.au
- Great condition.
- I'm pretty sure this was used twice, well 4 of the blades were. The rest still have the original oil coating on them.
-
29th April 2018 01:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th April 2018, 04:57 PM #2
Hi there,
I will take the Incra Mitre Gauge 1,000HD (Used) - $150 if you can box it up and give a Postage to 4069.
regardsBilly
-
29th April 2018, 06:11 PM #3Member
- Join Date
- May 2014
- Location
- Sunshine Coast
- Posts
- 65
I'll put my name on the dado set pending pickup details. Will PM tonight.
-
29th April 2018, 08:55 PM #4Novice
- Join Date
- Jun 2011
- Location
- Sydney
- Posts
- 12
Mitre Gauge and Dado Set are sold.
Original post is just waiting for re-approval as I edited it without realising it would need to be approved again, my bad, everything else is still available.
-
29th April 2018, 11:57 PM #5
I'm keen on the CVMax.
Will PM you now and call/SMS in the morning...
Cheers
-
30th April 2018, 02:18 PM #6
Just in case, here are my questions as per SMS:
- When was it purchased?
- Which VFD does it include, the 1 - 3 VFD or 3 - 3 VFD?
- Do you have any suitable ducting and/or connections (150mm or 200/225mm) available?
- When would be the best time to inspect it?
Cheers
-
30th April 2018, 02:29 PM #7Member
- Join Date
- Aug 2012
- Location
- Brisbane
- Posts
- 96
Hi,
I’ll buy the CvMax dust extractor if Junkie does not. Will need to know soonish though, if possible.
I’ll send a PM as well.
Regards,
Raymond
-
30th April 2018, 09:42 PM #8Novice
- Join Date
- Jun 2011
- Location
- Sydney
- Posts
- 12
Dust Extractor has been sold.
-
30th April 2018, 10:20 PM #9New Member
- Join Date
- Apr 2018
- Location
- AU
- Age
- 34
- Posts
- 6
I'm interested in the router lift and the wonder fence.
PM me if they're still available.
Thanks mate.
Sent from my E6853 using Tapatalk
-
1st May 2018, 09:33 AM #10Novice
- Join Date
- Jun 2011
- Location
- Sydney
- Posts
- 12
Send me an SMS on 0438610362 as both are still available, thanks.
-
1st May 2018, 12:16 PM #11New Member
- Join Date
- Apr 2018
- Location
- AU
- Age
- 34
- Posts
- 6
No worries bud, I'm busy at work at the moment I'll message you around dinner time tonight.
Sent from my E6853 using Tapatalk
-
1st May 2018, 04:13 PM #12Novice
- Join Date
- Jun 2011
- Location
- Sydney
- Posts
- 12
Table saw and Incra system have been sold.
Similar Threads
-
Grizzly Table saw with Incra LS super system?
By JapanDave in forum TABLE SAWS & COMBINATIONSReplies: 1Last Post: 30th April 2012, 08:47 PM -
Incra LS Super System
By Big Shed in forum INCRA JIGSReplies: 13Last Post: 26th January 2012, 06:39 PM -
Incra LS 17"Super system mounted on Festool Precisio and CMS
By therut in forum INCRA JIGSReplies: 1Last Post: 26th July 2009, 04:17 PM