Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 23
-
25th March 2019, 02:55 PM #1SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
UC100 for sale with UCCNC software (yes it is legal and legit)
UC100 barely used. With the accompanying UCCNC software.
This unit sells for $155 plus $27 postage on Ebay from US sellers. And you will have to pay GST on top. ($200 total plus UCCNC software if needed)
80 Euros direct from the makers, CNCDrive in Hungary, plus postage. They will only post DHL. 26 euros last time I ordered. ($170 total plus UCCNC software if needed)
Don't be confused with Chinese nock-offs sold on ebay. They are not genuine UC100s. They are not even a copy. Only use the UC100 name. They only have a Mach3 plugin and will not work with UCCNC.
UCCNC license is included with this UC100. This is legal and legit. The software license is tied to a particular hardware controllers serial number. I even double checked with Balazs (owner of CNCDrive in Hungary)
The UCCNC software costs 55 euros. And again this software license only works with this UC100. That is how they do it at CNCDrive.
Note that plugins are free for Mach3 and Mach4.
So to purchase new from CNCDrive, 80 + 26 + 55 = 151 euros. (approx 257 AUD at time of add)
You can have this one with UCCNC software license for $200 and I will include postage, AustPost express to anywhere in Aus.
https://www.cncdrive.com/UC100.html
-
25th March 2019 02:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th March 2019, 04:13 PM #2
Does it work with win 10?
-
25th March 2019, 04:41 PM #3SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
Yes UCCNC works with Windows10
see link for details.
https://www.cncdrive.com/UCCNC.html
-
25th March 2019, 08:22 PM #4
Does the uc100 work with win 10
CNC drive say 6.) Software prerequirements (install on Win XP only!)
-
25th March 2019, 08:24 PM #5SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
It does work on Win10
Read the page I referred to above.
XP does not include Net framework. It has to be installed on XP. Read the info.
- Compatible OP systems: Windows XP, 7, 8, 8.1,10 on all both 32 and 64bit versions.
-
26th March 2019, 05:04 PM #6SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
ProTools in Brisbane, who are the Stepcraft agents, are selling The UC100 for $189, and UCCNC software for $99.
So I will lower the price to $189 for the UC100 and include the UCCNC software license for free as well as express postage to anywhere in Aus.
-
29th March 2019, 08:44 PM #7SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
Video showing UCCNC control software
https://www.youtube.com/watch?v=UNMzwjxAljo
-
30th March 2019, 01:03 PM #8SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
-
1st April 2019, 01:04 PM #9SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
-
1st April 2019, 01:50 PM #10SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
I will include a 5 axis Break Out Board.
$189 for the UC100
Include the UCCNC software license for free. Value $100
5 axis break out board.
Express postage to anywhere in Aus.
-
2nd April 2019, 04:41 PM #11SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
I understand that there may be some who read this add, and be a little skeptical as to the legality of on selling a software license.
I get it. This is NOT the way MOST software vendors protect their software from pirating.
CNCDrive, the owners of UCCNC control software do it a different way.
They manufacture the CNC control hardware, UC100, AXXB-E, ETH400 etc.
They also write and own the UCCNC software that works with those hardware devices.
The way they license the software is that each license is tied to the serial number of that particular device.
That license will not work with any other hardware. Even another UC100. Only the device with the matching serial number.
So were you to buy multiple hardware devices from them, you would also have to purchase a UCCNC license for each device.
This is why CNCDrive has specifically given the OK to on-sell this UC100 together with the UCCNC license that is tied to it.
It is worth noting that UCCNC can be run in demo mode without a license. Just that it can not run a machine.
-
5th April 2019, 07:35 PM #12
How many inputs does it have Gman easy enough to hook up a G540?
I Need two inputs for the Xaxis
1 for y
2 for touch platesI like to move it move it, I like to move it.
-
5th April 2019, 10:54 PM #13SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
It is the same as a LPT connection to the G540. The UC100 simply plugs into the G540 in place of the LPT cable.
So just like the LPT, it has 12 outputs and 5 inputs
-
6th April 2019, 07:18 AM #14
Bugger thanks Greg I got all confused I want to get away from the parallel port may grab one of there new units.
I like to move it move it, I like to move it.
-
6th April 2019, 09:40 AM #15SENIOR MEMBER
- Join Date
- May 2005
- Location
- Cockatoo Vic
- Posts
- 996
The UC100 gets you away from the parallel port, with its limitations.
It uses the same DB25 physical connector type. This is very typical of CNC connections.
You no longer need a computer with LPT or older 32 bit OS. UC100 and UCCNC will run on modern computers. No parallel port needed.
Similar Threads
-
HEADS UP 3D Cabinet Design Software KD Max on sale in July
By CBC in forum ANNOUNCEMENTSReplies: 0Last Post: 28th June 2013, 04:09 PM -
G'Day - Is this Legal ?
By Utterbar in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 9Last Post: 26th September 2008, 08:20 PM -
legit music download sites
By Toolin Around in forum MusicReplies: 1Last Post: 12th July 2008, 03:11 PM -
Legal Wig
By Sculptured Box in forum BANDSAWN BOXESReplies: 10Last Post: 21st November 2007, 05:26 PM