Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Flame Myrtle
-
16th July 2018, 11:01 AM #1SENIOR MEMBER
- Join Date
- Jan 2018
- Location
- Tasmania
- Posts
- 262
Flame Myrtle
Hi folks have some planned myrtle pieces to sell all from the same slab with flame figure. 1@75×24×430mm
1@63×19×325
1@75×63×330 with an impact crack one end 10mm deep and surfacing 75 down one face.
1@51×51×495 which has an old chainsaw cut 2mm deep and 115 long on one side. If turning niether of these defects would be an issue.
Moisture content is 17% and weight about 3kg.
Looking for $75 plus post or courier freight.
Thanks Wayne 20180705_142145.jpg20180705_142048.jpg20180705_142807.jpg
-
16th July 2018 11:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th July 2018, 07:20 PM #2SENIOR MEMBER
- Join Date
- Jan 2018
- Location
- Tasmania
- Posts
- 262
20180705_141954.jpg
The other side.
-
18th July 2018, 08:34 PM #3SENIOR MEMBER
- Join Date
- Jan 2018
- Location
- Tasmania
- Posts
- 262
How about $65 including post?
-
3rd August 2018, 06:50 PM #4SENIOR MEMBER
- Join Date
- Jan 2018
- Location
- Tasmania
- Posts
- 262
No takers so will hang on to this. Thanks for looking.
-
22nd October 2018, 02:57 PM #5Intermediate Member
- Join Date
- Jun 2013
- Location
- melbourne
- Posts
- 32
Is the myrtle still available?
Similar Threads
-
Nice flame Myrtle.
By TasSculptor in forum TIMBERReplies: 4Last Post: 27th June 2018, 09:48 PM -
Walnut, sassafras, myrtle and flame rosewood boxes
By ajw in forum BOX MAKINGReplies: 30Last Post: 26th February 2017, 05:04 PM -
Flame Myrtle
By TasSculptor in forum TIMBERReplies: 0Last Post: 18th October 2015, 07:32 PM