I have for sale, which regretfully I cannot justify moving to Canberra:

SOLD 1/ Myford Super 7 Lathe with power feed and quickchange gearbox
3 jaw and 4 jaw chuck, faceplates, 19 change gears, travelling steady, tailstock and 3 drill chucks, adjustable frequency power supply (runs of standard 10amp GPO), stand, manual, and other accessories. $3000

2/ ZX sextf 30L milling machine, on stand and converted to 3 axis CNC (original hand wheels are all here too). Drill chuck and tool holder (4,5,6,8,10,12,14,16mm collets) $1500

3/ Horizontal cut-off saw (band saw). Paulicali 330.8.79. 180Watt motor, approx 100mm wide and 60mm high material capacity. $100

Also large collection of accessories including clamp kit (1/2" unc), cutting tools, vice.....

Open to discuss serious offers.

Mawson Lakes, SA
Contact Darryl 0421 037 392 to discuss

Attached Thumbnails

         

 

UPDATE: Lathe has been sold. Milling machine and cut-off saw still available.

Well... there was a bit of interest, but so far no sale on the mill. Price is negotiable and if the "home brew" CNC is putting anyone off, I'll happily convert it back to a full manual control mill with a suitably reduced price. It has three axis DRO which will/can be left in place on the machine.

Cut off saw is potentially under offer.

I'll be back in Adelaide for the weekend of 25/26 Feb which would make an ideal time to inspect - outside of that will just take a little arranging.

Hello Darryl
could you please tell me about the capacity of the mill:
Max X axis travel?
Max Y axis travel?
Z axis travel?
Spindle nose ? Is it morse taper No 3?

Regards Gerard

If memory serves me correct, it is an M3 taper.

Specs wise, there is a manual online at http://www.wttool.com/common/manuals/3006-0005.pdf which is suggesting a 175mm (Y) x 500mm (X) travel for the table and 120mm for the spindle, though I have seen specs that indicate a slightly larger Y travel. Best I can do in terms of confirmation is to check these numbers on Friday night.

Darryl.

Update: All sold - thanks for the interest.