Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
Thread: Arnold DeViblis Pressure pot
-
31st December 2017, 11:54 PM #1GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Arnold CIG Pressure pot
Having a clean out in the Pig Pen (shed/trailer) and found a 5 litre Pressure Pot (Arnold DeVibliss brand) that I'd started to modify for casting blanks. The centre suction pipe has been removed and that is as far as I've gone with it, decided on going away from casting.<br>
Make me a reasonable offer on it, as I don't know what it's worth? I did see a 20 litre one on EBay for something like $399, I DON'T want anything like that, I'm not greedy, just need to make room for other stuff. Prepared to swap for a bobbin sander in reasonable condition, if you think it's worth the swap? Can take pics of it tomorrow.<br>
KrynLast edited by KBs PensNmore; 1st January 2018 at 03:13 PM. Reason: Title correction
To grow old is mandatory, growing up is optional.
-
31st December 2017 11:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th January 2018, 12:57 AM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Also found in the Pig Pen, a spray gun which was hooked up to the pressure pot, unknown brand, open to offers. Will put up pics of the gun and pot in the morning.
KrynTo grow old is mandatory, growing up is optional.
-
4th January 2018, 08:17 PM #3GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
If no one wants this lot, it'll end up in the scrap metal drum.
KrynTo grow old is mandatory, growing up is optional.
-
5th January 2018, 08:37 PM #4GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
At this stage, I'll be going to Dooen on the Australia Day weekend, if anyone from that way would like it???? Just don't really want to see it go to the scrappy.
KrynTo grow old is mandatory, growing up is optional.
-
5th January 2018, 09:04 PM #5Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Kryn,
I've got one from Supercheap but the pictures I can find of your pressure pot seems to be narrower but taller so it would come in handy every so often.
Unfortunately I'm going to the beach for holidays tomorrow (not Dooen) but if Gab or Matt could bring it back for me I would love to have it.
Peter.
-
5th January 2018, 10:43 PM #6SENIOR MEMBER
- Join Date
- Oct 2011
- Location
- Langwarrin
- Age
- 43
- Posts
- 952
Unsure as to if I have the leave pass yet, so I can't put my hand up - however if I do get there I'll be happy to freight it back (maybe Matt will be more reliable)
"All the gear and no idea"
-
5th January 2018, 11:18 PM #7
-
6th January 2018, 09:58 AM #8
-
6th January 2018, 10:48 AM #9
Arnold DeViblis Pressure pot
Kryn,
If your having a clear, out may I suggest you bring some to Dave's GTG if your able.
You might be able to move some stuff on, and of set your fuel bill a little.
I'm sure Dave wont mind, last time I spoke with him he was considering another 3 sheds for storing "might be useful one day items"lol
Cheers Matt
-
6th January 2018, 01:01 PM #10GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Hi Sturdee,
I'll bring it along and then when you get it, you can pay me what you think it's worth??
The other gear I have is metal work related, a 1ton Morris chain Block, a 1/2 ton capacity girder (I beam) trolley, and a 1/2 ton single plate grab. I doubt that any of the woodies would want them.
Hopefully will see you there, provided Griselda gets me there.
KrynTo grow old is mandatory, growing up is optional.
-
7th January 2018, 10:12 AM #11
-
15th January 2018, 07:08 PM #12Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
-
16th January 2018, 12:13 AM #13GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Sorry for the delay in getting pics of the gear, but have been flat out helping a friend renovate a bathroom. He watched I worked!!! Will do it tomorrow afternoon, with measurements.
Also have a oxy propane type torch to dispose of.
KrynTo grow old is mandatory, growing up is optional.
-
17th January 2018, 11:07 PM #14GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Have put up some pics and prices.
Firefox LPG.jpg $5.00 Oxy Propane Sold
Girder trolley.jpg $10.00 runs on 75 mm wide I beam Sold
LPG torch.jpg $5.00 runs off a 3/8 thread gas bottle Sold
Plate Grab.jpg$5.00 1/2 ton capacity 1 grab only Sold
Spray gun.jpg $5.00 Condition unknown, believe to work OK Still available
Pressure pot.jpg $30.00 ONO Modified to pressure pot for casting 200 diam X 250 ? high Still available
Chain Block.jpg$10.00 1 ton capacity. Works well Sold
Can be picked up from Murray Bridge, Dooen (Australia Day W/E) or can post at buyers expense.
Just need to get rid of this stuff.
Kryn
Last edited by KBs PensNmore; 18th January 2018 at 04:12 PM. Reason: Some items sold
To grow old is mandatory, growing up is optional.
-
18th January 2018, 06:10 PM #15
Lifting gear all sold, bugger
Neil____________________________________________Every day presents an opportunity to learn something new
Similar Threads
-
Pressure pot loss of pressure
By daryl1 in forum CASTING & STABILISATIONReplies: 7Last Post: 13th June 2017, 09:52 AM -
Could this be used as a pressure pot
By madcraft in forum CASTING & STABILISATIONReplies: 3Last Post: 3rd June 2009, 11:02 PM -
Little Pressure Pot.
By tea lady in forum CASTING & STABILISATIONReplies: 2Last Post: 14th November 2008, 06:00 AM -
Arnold De Vilbiss "Tuffy" Compressor
By Jim Miley in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 31st July 2007, 07:24 PM