Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
13th March 2024, 09:14 AM #1
Home made tail stock about 250 high #2 MT.
I’ve wrecked a homebuilt metal lathe which I scored for the saddle and cross slide for my Wadkin RS8 and have the rest to dispose of.
Besides the tail stock there’s other bits, please go to the metal forum if interested.
Pick up only Concord NSW.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
13th March 2024 09:14 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th March 2024, 07:59 AM #2
Tailstock picked up yesterday by a keen young guy from the metal forum.
Will be taking the rest to scrap next week.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
Similar Threads
-
WANTED:SA. Lathe tail stock
By China in forum WANTED & WANTED TO BUY - in AustraliaReplies: 1Last Post: 15th June 2019, 12:32 AM -
Home Made Jessem Stock Guide Clone for New Harvey HW110LGE 30 Table Saw
By DomAU in forum TABLE SAWS & COMBINATIONSReplies: 2Last Post: 23rd January 2016, 06:19 PM -
Tail Stock Alignment.
By wm460 in forum METALWORK FORUMReplies: 28Last Post: 2nd February 2015, 12:20 PM -
Help with stuck tail stock
By ElizaLeahy in forum WOODTURNING - GENERALReplies: 20Last Post: 25th March 2009, 02:30 PM -
Head Stock & Tail Stock extention plates
By Babytoolman in forum WOODTURNING - GENERALReplies: 0Last Post: 25th December 2005, 11:37 AM