Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
24th July 2013, 09:32 PM #1Senior Member
- Join Date
- Apr 2009
- Location
- Melbourne,VIC
- Posts
- 157
restoring/rescueing a Binks 1967(?) Flying Dutchman
I guess this is a rescue.the boat sat rotting on its trailer in Portland Vic for,i don't know how long. Fibreglass hull, ply decking etc.Bought the lot with trailer,spars and sails for $50.00 AU.A quick look told me that ALL the cockpit flooring ply had delaminated.Easy to replace,,,,ONCE everything else had been removed.LOL Internet search told me it was a Binks and a 1968 regatta stamp on its main sail gave me some idea of it's age.So far i've managed to remove all the decking,and am now(with the help of my son)removing all the old cockpit flooring.I was amazed at the construction of this classic yacht.The things people do to save weight.All ply is 3.5mm,cockpit floor same,but with 5mm ply panels in high stress areas.Under floor? the bearers are 1 inch thick polystyrene foam!I will try add photos,when i figure out how
-
24th July 2013 09:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th February 2014, 10:24 PM #2Senior Member
- Join Date
- Apr 2009
- Location
- Melbourne,VIC
- Posts
- 157
It's been a very long while since i last posted anything about my Flying Dutchman.Since buying the Hartley ts 16 i've had it on the back burner,but now my 20yr old son has taken an interest in sailing,i've decided to give him the boat,IF he helps restore it.We have stripped the decking and cockpit flooring,and are cleaning up the rest.There is going to be a lot of work,but i think it will be worth getting this 1968 Binks back on the water.So far it needs a centre board casing and transom.the rest is just 3ply.I have asked around everywhere for information on rigging,but no one can help The Flying Dutchman association is next to useless.I will keep this post up to date,will post some photos soon.
-
19th February 2014, 01:45 AM #3Novice
- Join Date
- Feb 2014
- Location
- Australia
- Posts
- 21
Father-son projects are very cool; I am just waiting for my kid to grow up a bit, let's see if he also get's interested on the topic!
Upload pics soon; Can't wait to see how it looks!
-
19th February 2014, 07:25 PM #4Senior Member
- Join Date
- Apr 2009
- Location
- Melbourne,VIC
- Posts
- 157
My son turns 21 in Nov.I showed him video's of the FD's in action and he said YER! Mind you he is contributing to costs and often crews on my Hartley ts16. I'm a lucky father i guess
-
21st February 2014, 01:16 AM #5Novice
- Join Date
- Feb 2014
- Location
- Australia
- Posts
- 21
-
23rd February 2014, 09:23 PM #6Senior Member
- Join Date
- Apr 2009
- Location
- Melbourne,VIC
- Posts
- 157
Here are a few photo's of the '68 Binks.Collection 6 1497.jpg010 (2).jpg002 (2).jpg008 (3).jpg First is of the boat shortly after being brought home,second shows the framework after the decking had been removed,flooring too.Hard to see in these pics is the fact,that to cut weight,the boat uses styrene cockpit floor bearers.Cross framing is 3mm ply with oregon strips as framing.
-
23rd February 2014, 09:37 PM #7
Looking forward to seeing how you go with this, especially those styrene bits.
Good luck, Ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
30th March 2014, 08:13 PM #8Senior Member
- Join Date
- Apr 2009
- Location
- Melbourne,VIC
- Posts
- 157
latest development.Finding a little rot in the transom,my son removed the old,after first making a template.He's now looking for a suitable timber for its replacement.The centre board case has splits too,so thats our next move.My son's crowning glory,,,,lol He removed and using hand tools made and fitted a new support beam in the stern deck.New photo's in the album.
-
30th March 2014, 08:23 PM #9Senior Member
- Join Date
- Apr 2009
- Location
- Melbourne,VIC
- Posts
- 157
link to my photobucket album http://s391.photobucket.com/user/HEL...rary/kittiwake.
-
18th May 2014, 08:42 PM #10Senior Member
- Join Date
- Apr 2009
- Location
- Melbourne,VIC
- Posts
- 157
Looks like the transom was made of Western red cedar? light weight,dark red,Only decent timber we could find was Tassie oak!!! Owen (my son) had lots of fun (not) cutting and shaping this weird looking piece.Still,thanks to decent weather for once He managed to epoxy the new piece in before having to catch his train back to the other side of Melbourne.Styrene? Ain't we lucky.At the factory he works at,they have just received a shipment for parts packed with,,,,,,styrene sheets an inch thick! perfect.Now for removing the old centre case.
Similar Threads
-
Flying Dutchman Restoration
By onthebeachalone in forum BOAT BUILDING / REPAIRINGReplies: 27Last Post: 31st October 2011, 06:16 PM -
The Future Of Computing (1967)
By wheelinround in forum COMPUTERSReplies: 0Last Post: 12th September 2007, 10:33 AM -
Rescueing old drill bits
By Shedhand in forum HAND TOOLS - UNPOWEREDReplies: 17Last Post: 18th January 2007, 11:05 PM -
pressure pot plus binks gun
By tanii51 in forum FINISHINGReplies: 3Last Post: 16th November 2006, 12:57 PM -
Low Flying
By Gra in forum WOODIES JOKESReplies: 2Last Post: 19th March 2006, 08:07 PM