Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 37
Thread: hsc helpp please!!!!!!
-
16th October 2011, 07:43 PM #16SENIOR MEMBER
- Join Date
- Jan 2004
- Posts
- 686
Your drawing may have been a little basic for the teacher to say not to make it. Remember that there's no difference between a pool table and a coffee table except for the cost and the top surface. Both are fairly basic to make.
It's possible to make a high quality project for under $200.
You need to show exemplary skill, exemplary attitude and exemplary quality of finish to achieve a band 6. Remember that your project needs to show a wide *range* of skills.
A small, upper-end jewellery box would do this. Look at Art Nouveau OR Art Deco for inspiration. Needs to be really well finished, well designed and well executed. Hepplewhite shows similar options in his Cabinetmakers Guide, or Sheraton in their Cabinetmakers' Directory, albeit a bit bigger than a jewellery box.
Your school library and IA department would have heaps of inspirational books for making small cabinets/jewellery boxes.
Perhaps you should look at making a jewellery *cabinet*, high quality and finished appropriately, as opposed to a simple box, a'la this executed at a higher level of difficulty/more demanding requirements
Look here to find the marking guidelines for the major project - understand them well *before* you start to design and make your project.
http://www.boardofstudies.nsw.edu.au..._markguide.pdf
Cheers,
eddie
-
16th October 2011 07:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
-
17th October 2011, 09:06 AM #17GOLD MEMBER
- Join Date
- Feb 2005
- Location
- Sydney
- Age
- 74
- Posts
- 1,389
timber
Tony,
For under your $200, I can provide Austrlian red cedar, coachwood, northern silky oak perhaps some rosewood, all NSW timbers, sufficient quantity to make whatever you want... well apart from 4 metre long dining able perhaps....... I've got some timber in the car port at Cremorne that would be suitable
Only too happy to assist.
Work out what you want to build and a cutting list for rough sawn timber that from which we can work out the timber you want in rough sawn boards or slabs.... you willbe doing the thicknessing and processing of the boards......from what I understand, that is part of the HSC requirements.
Greg
0412 996260
Greg
-
17th October 2011, 10:40 PM #18Intermediate Member
- Join Date
- Oct 2011
- Location
- Fairfield
- Posts
- 25
-
17th October 2011, 10:50 PM #19Intermediate Member
- Join Date
- Oct 2011
- Location
- Fairfield
- Posts
- 25
Well I showed him a picture on the net, he didnt say nothing about the difficulty, he just told me that it was too small and that you will easily finish it well under a year so yeah.
I have decided on what to make thanks to Corb hahah It will be something very similar, maybe even the same as the James Krenov cabinets. I have shown the picture to both my woodwork and head teachers and they have told me it is a very good furniture to build, shows wide range of skills and techniques etc.
Heres the picture: JK's current work
And about the timber, asked him today aswell, he told dont worry about the quality, you can just use cheap wood (say radiata pine?) and then stain it to the colour you want. You reckon thats a good idea?
Ward I will get to back to you soon about the timbers yeah as I have not done the cutting list yet, and I am still not sure what timber to choose so yeah.
Thanks for all your help guys!! I appreciate it alot!!
-
18th October 2011, 06:47 AM #20SENIOR MEMBER
- Join Date
- Jan 2004
- Posts
- 686
Personally, Tony, I'd take advantage of someone like Greg Ward, or Harper Timber if you want someone closer to home.
Radiata dints easily (you have to keep it safe in the workshop for a year,) scratches easily, and tears out with anything other than blunt tools. And even when it's stained, it still looks like you've put lipstick on a pig.
I'd use quality timbers. To be honest, for the amount you want, you're probably looking at $20 difference. No-brainer, really
Cheers,
eddie
-
18th October 2011, 07:54 AM #21
Do two. Make all your mistakes in pine on the first one and then go for something nicer for the second.
-
18th October 2011, 08:01 AM #22
-
18th October 2011, 09:00 AM #23
I'm not saying don't make it out of pine but I personally wouldn't make a Krenov inspired cabinet out of the stuff. Before you decide what wood to use get in contact with Greg Ward who has already replied to this thread. There are some beautiful cabinet timbers available to you for not much more than what it will cost you to make in pine.
Australian Red Cedar is beautiful stuff to work with and finishes very nicely. The main cabinet could be made with it which will keep weight down and a couple of bookmatched Silky Oak doors will give a wow factor. Rosewood can also be amazing stuff.
You have an opportunity to make something very special here that could become a family heirloom if done properly. If made out of pine it won't become that.It's only a mistake if you don't learn from it.
-
18th October 2011, 04:55 PM #24GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,703
I agree - use a nice quality timber such as red cedar and you won't regret it. It won't be much more expensive than radiata. Greg's prices are cheap (compare them to other timber suppliers and you'll see)
I made a hall table out of the cedar Greg has. It's really easy to work with (it's quite soft) and finishes beautifully!
Good luck,
Andy
-
21st January 2012, 12:43 AM #25Intermediate Member
- Join Date
- Oct 2011
- Location
- Fairfield
- Posts
- 25
Hey guys it's been awhile since I last posted, just wanted to tell you guys the timbers came and everything else has been good. Just wanted to share my progress so far. I encountered MANY problems already, (lol) luckily it was all resolved so hopefully I could get marks for that. I felt that I haven't done much but hey lets just see what happens throughout the year. I attached pictures of my progress and problems so check them out thanks!
Tony
-
21st January 2012, 08:35 AM #26
Nice work so far Your woods look a hell of a lot better than pine I love the satisfaction of taking a full slab of wood, breaking it down, dressing it then turning it into something I can use or look at knowing what it once was. Thanks for the update and best of luck with the rest of the project.
It's only a mistake if you don't learn from it.
-
21st January 2012, 08:41 AM #27
-
23rd January 2012, 10:57 AM #28GOLD MEMBER
- Join Date
- Feb 2005
- Location
- Sydney
- Age
- 74
- Posts
- 1,389
looking good
Look forward to seeing the grain in the red cedar. Should be very nice.
Greg
-
10th August 2012, 07:28 PM #29Intermediate Member
- Join Date
- Oct 2011
- Location
- Fairfield
- Posts
- 25
Hey guys sorry for not posting for a while, it has been a busy year with hsc and all. Today was the due date for the major project, and I must say I am proud of what I have achieved considering that I was clueless in Year 11. Wished I still had a week or two, however pretty relieved it's finally finished.
I must say there's quite a lot of mistake and is definately different project compared to my friends work. But here it is!
-
10th August 2012, 08:04 PM #30Intermediate Member
- Join Date
- Mar 2012
- Location
- uki
- Posts
- 37
Good shot Tony.
I would be proud too! You certainly picked a piece to show off your dovetail making skills - they look pretty good. Did you do the secret compartment-don't answer that.
Turning photo 1 into photos 2 and 3.........
If you wanted to take this further, read James Krenov's books to see where he is coming from and then reassess your own cabinet. Not only do you have a piece to be proud of there but also a great teaching tool.
Well done.
Cheers, Tony.
Similar Threads
-
Winstall.exe - helpp!!
By alisaselez in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 9Last Post: 19th December 2006, 07:45 AM