Results 1 to 12 of 12
  1. #1
    Join Date
    Dec 2012
    Location
    Sydney
    Posts
    26

    Default Repairing wooden rocking horse

    Hi all,

    So we have our first little one on the way... Which gives me a bit of time to finish this project.

    I reckon I have an above average ability in the DIY and repair department and am wanting to pull something together for the little guy or girl.

    I picked up the attached timber rocking horse (yet to collect) which has a bit of damage.

    I was hoping for some guidance re what to use and how to go about it. Particularly the repair to the nose.

    I'm thinking of stripping the guy back and either staining a lighter colour or going for a white wash instead.

    Any guidance would be appreciated!


    Rocking horse repair https://imgur.com/gallery/YQNJx

    http://i.imgur.com/gOBVgrg.png
    http://i.imgur.com/3WDuvv7.png
    http://i.imgur.com/r0XsDUd.png

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    4,411

    Default

    That damage looks rather unusual for timber. Hard to figure out how a crack of that magnitude could have been caused without significant crushing etc around the crack site. Generally the grain in the timber on the head of a traditionally constructed rocking horse runs lengthwise, so very difficult to damage like this.
    Mobyturns

    In An Instant Your Life CanChange Forever

  4. #3
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Are you sure the horse is wooden?

    From the photos, it looks to me like what you have is a wood frame with plaster details.
    In particular, the broken nose doesn't look at all like a typical timber fracture
    regards from Alberta, Canada

    ian

  5. #4
    Join Date
    Dec 2012
    Location
    Sydney
    Posts
    26

    Default

    You might be right.

    Unfortunately I'm picking it up in a few weeks when passing through the area but looking at it closely it does look like a plaster detail.

    Perhaps I need to find a plaster forum! Lol.

    Any tips from the wisdom pool are still appreciated even though it isn't timber?

  6. #5
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    4,411

    Default

    Traditional rocking horses quite often have a thickish coat of gesso over the whole timber body as it is easier to sand and fair gesso than timber. The joins in the body also look a little unusual from the traditional horses that I have seen.

    This link may give you some ideas and resources. https://www.rockinghorse.co.uk/restorations.html
    Mobyturns

    In An Instant Your Life CanChange Forever

  7. #6
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    I'm interested to see the what and how of the repair/restoration as I have a 100yrs old swing rocking horse to repair/restore sitting in the shed...thank you, cheers, crowie

  8. #7
    Join Date
    May 2011
    Location
    Murray Bridge SA
    Posts
    3,339

    Default

    The way that I'd repair it, is to use an epoxy resin glue to repair the joint, then, if it is a plaster type finish, use a top quality plaster filler to fill. Leave a good build up on it, so that it can be shaped to match the existing surrounds.
    Kryn
    To grow old is mandatory, growing up is optional.

  9. #8
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    Quote Originally Posted by KBs PensNmore View Post
    The way that I'd repair it, is to use an epoxy resin glue to repair the joint, then, if it is a plaster type finish, use a top quality plaster filler to fill. Leave a good build up on it, so that it can be shaped to match the existing surrounds.
    Kryn

    On the plaster side Kryn, We need Trevor to work his magic.....Peter

  10. #9
    Join Date
    May 2011
    Location
    Murray Bridge SA
    Posts
    3,339

    Default

    Unfortunately, it'll be impossible to get it to him, now .
    Kryn
    To grow old is mandatory, growing up is optional.

  11. #10
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    1,809

    Default Query the age

    That looks to me as though it may be a very contemporary cast resin horse. I hope that you didn't pay too much for it.

    Lovely wooden rocking horses from the 1940s and 1950s seem to sell for very little at the moment. An antique shop near me has one they can't sell - but I do not know how much they are asking. Another shop has sold two in the last year - their prices are much more realistic.

    This is an example of a wooden horse with wear and tear 83 Rocking Horse.jpg (mine but not for sale)

    The positive of it being a cast resin is that you can just use a good gap filling epoxy like Epox-E-Glue (Boatcraft Pacific) or Mega-Epoxy to fix the crack and then paint over it.

  12. #11
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    Quote Originally Posted by Xanthorrhoeas View Post
    That looks to me as though it may be a very contemporary cast resin horse. I hope that you didn't pay too much for it.

    Lovely wooden rocking horses from the 1940s and 1950s seem to sell for very little at the moment. An antique shop near me has one they can't sell - but I do not know how much they are asking. Another shop has sold two in the last year - their prices are much more realistic.

    This is an example of a wooden horse with wear and tear 83 Rocking Horse.jpg (mine but not for sale)

    The positive of it being a cast resin is that you can just use a good gap filling epoxy like Epox-E-Glue (Boatcraft Pacific) or Mega-Epoxy to fix the crack and then paint over it.
    I have one similar but older, I'm missing one of the swing hoops and the support stand is fallen apart....
    all any an information on the repair process would be greatly appreciated as it scares me to bits just trying to work out where to start....

  13. #12
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    1,809

    Default

    Hi Crowie,

    Repairing mine - to the extent that I have - has only required some woodwork because a 'chunk' of the neck had fallen out/disappeared. Some complex angles and a bit of glue, fairing it up and - like new(ish). I have bought some milk paint for it, but since it is in storage at the moment (awaiting grandchildren since mine have finished with it) I won't be rushing in. Too many other things to make for children in their 20's!

    The swing hoops on mine are very simple. I think that you could easily reproduce one from some round steel bar. Just use your existing one as a model. An oxy torch, an anvil (or lump of steel or iron) and a hammer would make short work of that. I suspect one of the metalworkers on the forums could knock one up for you too.

    Why don't you post some photos in the restoration forum? I'm sure that you will get some advice.

    david

Similar Threads

  1. carved wooden rocking horse
    By wuzatrewunce in forum WOODCARVING AND SCULPTURE
    Replies: 3
    Last Post: 20th May 2009, 09:45 PM
  2. rocking horse ??
    By katy in forum TOY MAKING
    Replies: 4
    Last Post: 14th May 2009, 11:51 AM
  3. wooden rocking horse
    By franc in forum WOODWORK - GENERAL
    Replies: 11
    Last Post: 31st July 2008, 11:05 PM
  4. Rocking Horse
    By MICKYG in forum WOODWORK - GENERAL
    Replies: 2
    Last Post: 8th February 2006, 10:16 PM
  5. Rocking Horse
    By Backyarder in forum DESIGNS & PLANS FOR PROJECTS
    Replies: 17
    Last Post: 8th July 2004, 08:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •